Image Module/画像モジュール

From FreeCAD Documentation
Revision as of 10:59, 5 December 2018 by Luc (talk | contribs) (Created page with "== フィーチャー ==")

画像モジュールは様々なタイプのビットマップ画像bitmap images を扱うためのもので、FreeCADでそれらの画像を開くことを可能にします

現在のところ、このモジュールでは.bmp、.jpg、.pngそして.xpmの形式のファイルを分離表示されるビューワーウィンドウで開くことができます。またWebカメラからの画像をキャプチャーすることが可能なツールもあります。

フィーチャー

  • The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with Image Import, the second button of the image workbench.
  • The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
  • This function is only available if you have opened a FreeCAD document.
  • The image can be moved in 3D-space by editing the placement in the Property editor.
  • The major use is tracing over the image, in order to generate a new part while using the image as a template.
  • The image is imported with 1 pixel = 1mm.
 * The recommendation is to have the imported image at a reasonable resolution.
  • The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
  • The image can be moved by editing the X/Y/Z-values in the Property editor.
  • The image can be rotated around any axis by using the Property editor.

Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 mm at import or later by editing the placement of the image.

Tools

Image Import

Raytracing Module
Draft Module