Ambiente de trabajo Imagen

From FreeCAD Documentation
Revision as of 09:41, 26 September 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

El módulo de imagen maneja diferentes tipos de imágenes de mapa de bits, y le permite abrirlos en FreeCAD.

Actualmente, los módulos le permiten abrir los formatos de archivo .bmp, .jpg, .png y .xpm en una ventana de visualización separada.

Currently, the module lets you open .bmp, .jpg, .png and .xpm file formats in a separate viewer window.

Features

  • The image workbench also allows you to import an image on a plane in the 3D-space of FreeCAD with Image Import, the second button of the image workbench.
  • The imported image can be attached like a sketch to one of the main three planes (XY/XZ/YZ) with positive or negative offset.
  • This function is only available if you have opened a FreeCAD document.
  • The image can be moved in 3D-space by editing the placement in the Property editor.
  • The major use is tracing over the image, in order to generate a new part while using the image as a template.
  • The image is imported with 1 pixel = 1mm.
 * The recommendation is to have the imported image at a reasonable resolution.
  • The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
  • The image can be moved by editing the X/Y/Z-values in the Property editor.
  • The image can be rotated around any axis by using the Property editor.

Consejo:
Trazar con elementos de sketcher sobre una imagen funciona mejor si la imagen tiene un pequeño desplazamiento (negativo) al plano de sketch.
Puede establecer un desplazamiento de -0,1 mm en la importación o posterior editando la ubicación de la imagen.

Herramientas

Importar Imagen

Raytracing Module/es
Draft Module/es