Ambiente de trabajo Imagen
El módulo Imagen gestiona distintos tipos de imágenes de bitmaps, y te permite abrirlos en FreeCAD. En la actualidad, el módulo permite abrir en una ventana de visualización aparte los formatos .bmp,.jpg,.png y xpm. También hay una herramienta que permite capturar una imagen de una webcam.
The image workbenches also allow to import an image on a plane in the 3D-space of FreeCAD. This function is available via the second button of the image workbench. .
This function is only available if you have opened a FreeCAD document.
The image can be moved in 3D-space by editing the placement in the Property editor. The major use is tracing over the image, in order to generate a new part at using the image as template.
The image can be scaled by editing the "XSize" and "YSize" values in the Property editor.
Tip:
Tracing with sketcher elements over an image works best if the image has a small (negative) offset to the sketch plane.
You can set an offset of -0,1 at import or later by editing the placement of the image.