Image CreateImagePlane/ru

From FreeCAD Documentation
Revision as of 16:51, 10 March 2019 by Baritone (talk | contribs) (Created page with "{{Userdocnavi/ru}}")

Image CreateImagePlane

Системное название
Image CreateImagePlane
Расположение в меню
Toolbars → Create a planar image in the 3D space
Верстаки
Image
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Image Open, Image Scaling

Описание

The CreateImagePlane tool imports a bitmap image and places it on one of the XY, YZ or XZ planes.

Использование

  1. Press the Image Plane button.
  2. Select the desired image in your system.
  3. Choose the plane where the image will be placed, give an offset value, and press OK.

The resulting ImagePlane object uses the ratio of 1 pixel to 1 millimeter; in order for the image to display well, it should have enough resolution.

When importing the image, you may wish to add an offset of -0.1 mm in order to place the image slightly behind the working plane; this will make it easy to trace (draw on top) the image with the Draft or Sketcher tools.

If no offset is given to the image initially, its position can still be adjusted in the property editor.

Properties

Base

  • ДанныеPosition: specifies the coordinates of the base point of the image plane.
  • ДанныеAngle: specifies the angle of rotation of the image plane.
  • ДанныеAxis: specifies the axis used for the rotation angle.

Image Plane

  • ДанныеXSize: specifies the width of the image plane.
  • ДанныеYSize: specifies the height of the image plane.
  • ДанныеImage Plane: specifies the image to use for this plane.