Strumento di compilazione di FreeCAD
Lo Strumento per la costruzione di FreeCAD (FreeCAD build tool o fcbt) è uno script in Python ubicato in
trunc/src/Tools/fcbt.py
Può essere usato per semplificare alcune frequenti operazioni nella costruzione, distribuzione e estensione di FreeCAD.
Utilizzo
Con Python installato correttamente, fcbt può essere richiamato con il comando
python fbct.py
che visualizza un menu, in cui è possibile selezionare l'operazione che si desidera utilizzare per:
FreeCAD Build Tool Usage: fcbt <command name> [command parameter] possible commands are: - DistSrc (DS) Build a source Distr. of the current source tree - DistBin (DB) Build a binary Distr. of the current source tree - DistSetup (DI) Build a Setup Distr. of the current source tree - DistSetup (DUI) Build a User Setup Distr. of the current source tree - DistAll (DA) Run all three above modules - NextBuildNumber (NBN) Increase the Build Number of this Version - CreateModule (CM) Insert a new FreeCAD Module in the module directory For help on the modules type: fcbt <command name> ?
Al prompt inserire il comando abbreviato che si desidera utilizzare. Ad esempio digitare "CM" per creare un modulo.
DistSrc
The command "DS" creates a source distribution of the current source tree.
DistBin
Il comando "DB" crea una distribuzione binaria dell'albero di codice sorgente attuale.
DistSetup
The command "DI" creates a setup distribution of the current source tree.
DistSetup
The command "DUI" creates a user setup distribution of the current source tree.
DistAll
Il comando "DA" esegue "DS", "DB" e "DI" in sequenza.
NextBuildNumber
The "NBN" command increments the build number to create a new release version of FreeCAD.
CreateModule
Il comando "CM" crea un nuovo modulo dell'applicazione.