FreeCAD Build Tool/it: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Created page with "{{Userdocnavi/it}}")
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{Docnav|Start up and Configuration|Module Creation}}
{{Docnav/it|[[Start up and Configuration/it|Avvio e Configurazione]]|[[Module Creation/it|Creare un modulo]]}}


Lo '''Strumento per la costruzione di FreeCAD''' (FreeCAD build tool o '''fcbt''') è uno script in Python ubicato in
Lo '''Strumento per la costruzione di FreeCAD''' (FreeCAD build tool o '''fcbt''') è uno script in Python ubicato in
Line 56: Line 56:
{{Docnav/it|[[Start up and Configuration/it|Avvio e Configurazione]]|[[Module Creation/it|Creare un modulo]]}}
{{Docnav/it|[[Start up and Configuration/it|Avvio e Configurazione]]|[[Module Creation/it|Creare un modulo]]}}


{{Userdocnavi}}
{{Userdocnavi/it}}


[[Category:Developer Documentation/it]]
[[Category:Developer Documentation/it]]

Revision as of 20:23, 4 March 2019

Lo Strumento per la costruzione di FreeCAD (FreeCAD build tool o fcbt) è uno script in Python ubicato in

trunc/src/Tools/fcbt.py

Può essere usato per semplificare alcune frequenti operazioni nella costruzione, distribuzione e estensione di FreeCAD.

Utilizzo

Con Python installato correttamente, fcbt può essere richiamato con il comando

python fbct.py

che visualizza un menu, in cui è possibile selezionare l'operazione che si desidera utilizzare per:

FreeCAD Build Tool
 Usage:
    fcbt <command name> [command parameter]
 possible commands are:
  - DistSrc         (DS)   Build a source Distr. of the current source tree
  - DistBin         (DB)   Build a binary Distr. of the current source tree
  - DistSetup       (DI)   Build a Setup Distr. of the current source tree
  - DistSetup       (DUI)  Build a User Setup Distr. of the current source tree
  - DistAll         (DA)   Run all three above modules
  - NextBuildNumber (NBN)  Increase the Build Number of this Version
  - CreateModule    (CM)   Insert a new FreeCAD Module in the module directory
 
 For help on the modules type:
   fcbt <command name> ?

Al prompt inserire il comando abbreviato che si desidera utilizzare. Ad esempio digitare "CM" per creare un modulo.

DistSrc

Il comando "DS" crea una distribuzione di codice sorgente dell'albero di codice sorgente attuale.

DistBin

Il comando "DB" crea una distribuzione binaria dell'albero di codice sorgente attuale.

DistSetup

Il comando "DI" crea una distribuzione di setup dell'albero di codice sorgente attuale.

DistSetup

Il comando "DUI" crea una distribuzione di setup dell'utente dell'albero di codice sorgente attuale.

DistAll

Il comando "DA" esegue "DS", "DB" e "DI" in sequenza.

NextBuildNumber

Il comando "NBN" incrementa il numero della costruzione per creare una nuova versione di FreeCAD.

CreateModule

Il comando "CM" crea un nuovo modulo dell'applicazione.