Пример анализа Методом Конечных Элементов (FEM)

From FreeCAD Documentation
Revision as of 20:08, 11 April 2017 by Renatorivo (talk | contribs)
Tutorial
Topic
Finite Element Analysis
Level
Beginner
Time to complete
10 minutes + Solver time
Authors
Drei
FreeCAD version
0.16.6700 or above
Example files
See also
None

Введение

Это руководство предназначено для того чтобы ознакомить с основными принципами работы с верстаком FEM, а также большинством доступных инструментов для статического анализа.

Requirements

  • FreeCAD version 0.16.6700 or above
  • Netgen and/or GMSH is installed on the system
  • In the case of GMSH, installation of psicofil's macro is recommended
  • Calculix is installed on the system
  • The reader has the basic knowledge to use the Part and PartDesign Workbenches

Последовательность действий

Моделирование

В этом примере в качестве объекта исследования используется Куб, но также вместо него могут быть использованы модели созданные в Верстаках Part или PartDesign.

  1. Создать новый документ
  2. Активировать верстак Part
  3. Создать Куб
  4. Изменить его размеры (Box) на следующие:
    1. Length: 8000 мм
    2. Width: 1000 мм
    3. Height: 1000 мм

Теперь у нас есть модель с которой можно работать.

Создание Анализа

Netgen
  1. Выбрать модель
  2. Кликнуть в меню New mechanical analysis, чтобы создать анализ из выбранного объекта
  3. В диалоге создания сетки кликнуть OK

Вы также можете перетащить сетку в Mechanical Analysis, у которого нет сетки, внутри древа проекта.

GMSH

Макросы от psicofil's - строго рекомендуются и используется в данном примере.

  1. Активировать макрос
  2. Выбрать объект, который вы хотите использовать. В нашем случае это Куб
  3. Выберете пункт Create Mechanical Analysis from mesh
  4. Кликните OK

Мы создали сетку для нашего объекта и готовы добавить к нему ограничения и действующие силы.

Constraints and Forces

  1. Hide the mesh from the Tree View.
  2. Show the original model
  3. Select Create FEM fixed constraint
  4. Select the back face of the Cube (face on the YZ axis) and click OK
  5. Select Create FEM force constraint
  6. Select the front face of the Cube (the face parallel to the back face) and set the Area load value to 9000000.00
  7. Set the Direction to -Z by selecting one of the face edges parallel to that direction.
  8. Click OK

Теперь мы установили ограничения и силы для нашего статического анализа.

Final preparations

  1. Select Mechanical material... and choose Calculix as the material
  2. Click OK

Running the Solver

Standard Procedure
  1. Select the solver object contained in the Mechanical Analysis
  2. Select Start calculation from the menu
  3. Select Write Calculix Input File
  4. Select Run Calculix
  5. Click Close
Quick Procedure
  1. Select the solver object contained in the Mechanical Analysis
  2. Click on Quick Analysis.

Analyzing Results

  1. From the Object Tree, select the Results object
  2. Select Show result
  3. Choose among the different Result types to view the results
  4. The slider at the bottom can be used to alter the mesh visualization. This allows us to visualize the deformation experienced by the object, keep in mind that this is an approximation.
  5. To remove the results select Purge results
Comparison to previous example file

If you select the Z displacement result type, you can see that the obtained value is almost identical to the test example provided by FreeCAD. Differences may occur due to the quality of the mesh and the number of nodes it possesses.


Теперь мы закончили с основными принципами работы FEM Module.



Other languages: