FEM tutorial/ru: Difference between revisions
(Created page with "Теперь у нас есть модель с которой можно работать.") |
(Created page with "==== Создаем сетку ==== # Переключитесь на Верстак FEM") |
||
Line 32: | Line 32: | ||
Теперь у нас есть модель с которой можно работать. |
Теперь у нас есть модель с которой можно работать. |
||
==== |
==== Создаем сетку ==== |
||
# Переключитесь на Верстак FEM |
|||
# Switch to the FEM Workbench |
|||
===== Netgen ===== |
===== Netgen ===== |
Revision as of 18:05, 26 December 2015
Tutorial |
Topic |
---|
{{{Topic}}} |
Level |
Новичок |
Time to complete |
10 минут + время работы Решателя |
Authors |
Drei |
FreeCAD version |
0.16 и выше |
Example files |
See also |
None |
Введение
Это руководство предназначено для того чтобы ознакомить с основными принципами работы с FEM Верстаком, а также большинством доступных инструментов для статического анализа.
Требования
- Версия FreeCAD 0.16 и выше
- Netgen и/или GMSH установленные в вашей системе
- В случаем когда используется GMSH, рекомендуется установить psicofil's макросы
- Calculix установленный в вашей системе
- Читатель должен обладать базовыми понятиями о том как использовать Верстаки Part и PartDesign
Последовательность действий
Моделирование
В этом примере в качестве объекта исследования используется Куб, но также вместо него могут быть использованы модели созданные в Верстаках Part или PartDesign.
- Создайте новый документ
- Активируйте Part Workbench
- Создайте Куб
Теперь у нас есть модель с которой можно работать.
Создаем сетку
- Переключитесь на Верстак FEM
Netgen
- Select the model
- Select File:Fem FemMesh.svg Create FEM mesh
- Click Ok
- Select the Mesh from the Tree View
- Click New mechanical analysis from the menu to create an analysis from the mesh that was created.
You can also drag and drop a mesh to a Mechanical Analysis that does not have a mesh within the Tree View.
GMSH
The usage of psicofil's macro is recommended, and is used for this example.
- Activate the macro
- Select the object you wish to use, in this case our Cube
- Check the box Create Mechanical Analysis from mesh
- Click OK
We have now meshed our object and are ready to add constraints and forces.
Constraints and Forces
- Hide the mesh from the Tree View.
- Show the original model
- Select Create FEM fixed constraint
- Select the bottom face of the Box and click OK
- Select Create FEM force constraint
- Select the top face of the Box and set the Area load value to 20 000
- Click OK
We now have established the restrictions and forces for our static study.
Final preparations
- Select File:Fem Material.svg Mechanical material... and choose Steel-generic as the material
- Click OK
Running the Solver
- Select File:Fem NewAnalysis.svg Start calculation from the menu
- Select Write Calculix Input File
- Select Run Calculix
- Click Close
Analyzing Results
- Select File:Fem Result.svg Show result
- Choose among the different Result types to view the results
- The slider at the bottom can be used to alter the mesh to view the deformation in a simplified manner
- To remove the results select File:Fem PurgeResults.png Purge results
We are now finished with the basic workflow for the FEM Module.