FEM tutorial/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
No edit summary
Line 1: Line 1:


{{TutorialInfo
{{TutorialInfo/ru
|Topic= Анализ методом конечных элементов
|Topic= Finite Element Analysis
|Level= Beginner
|Level= Новичок
|Time= 10 minutes + Solver time
|Time= 10 минут + время работы Решателя
|Author=[http://freecadweb.org/wiki/index.php?title=User:Drei Drei]
|Author=[http://freecadweb.org/wiki/index.php?title=User:Drei Drei]
|FCVersion=0.16 or above
|FCVersion=0.16 и выше
|Files=
|Files=
}}
}}

Revision as of 10:32, 6 March 2016

Руководство
Тема
Анализ методом конечных элементов
Уровень
Новичок
Время для завершения
10 минут + время работы Решателя
Авторы
Drei
FreeCAD версия
0.16 и выше
Примеры файлов
Смотрите также
None

Введение

Это руководство предназначено для того чтобы ознакомить с основными принципами работы с FEM Верстаком, а также большинством доступных инструментов для статического анализа.

Требования

  • Версия FreeCAD 0.16 и выше
  • Netgen и/или GMSH установленные в вашей системе
  • В случаем когда используется GMSH, рекомендуется установить psicofil's макросы
  • Calculix установленный в вашей системе
  • Читатель должен обладать базовыми понятиями о том как использовать Верстаки Part и PartDesign

Последовательность действий

Моделирование

В этом примере в качестве объекта исследования используется Куб, но также вместо него могут быть использованы модели созданные в Верстаках Part или PartDesign.

  1. Create a new document
  2. Activate the Part Workbench
  3. Create a Cube
  4. Change its Dimensions to the following:
    1. Height: 1.000 mm
    2. Length: 8.000 mm
    3. Width: 1.000 mm

Теперь у нас есть модель с которой можно работать.

Creating the Analysis

Netgen
  1. Select the model
  2. Click New mechanical analysis from the menu to create an analysis from the object that was selected
  3. In the meshing dialog, click OK

Вы также можете, в Tree View, перетащить сетку в Mechanical Analysis у которого нет сетки.

GMSH

Макросы от psicofil's - строго рекомендуются и используется в данном примере.

  1. Активировать макрос
  2. Выберете объект который вы хотите использовать, в нашем случае это Куб
  3. Выберете пункт Create Mechanical Analysis from mesh
  4. Кликните OK

Теперь когда мы создали сетку для нашего объекта, мы готовы добавить к нему ограничения и действующие силы

Constraints and Forces

  1. Hide the mesh from the Tree View.
  2. Show the original model
  3. Select Create FEM fixed constraint
  4. Select the back face of the Cube (face on the YZ axis) and click OK
  5. Select Create FEM force constraint
  6. Select the front face of the Cube (the face parallel to the back face) and set the Area load value to 9000000.00
  7. Set the Direction to -Z by selecting one of the face edges parallel to that direction.
  8. Click OK

Теперь мы установили существующие ограничения и силы для нашего статического анализа.

Final preparations

  1. Select File:Fem Material.svg Mechanical material... and choose Calculix as the material
  2. Click OK

Running the Solver

Standard Procedure
  1. Select the solver object contained in the Mechanical Analysis
  2. Select File:Fem NewAnalysis.svg Start calculation from the menu
  3. Select Write Calculix Input File
  4. Select Run Calculix
  5. Click Close
Quick Procedure
  1. Select the solver object contained in the Mechanical Analysis
  2. Click on File:Fem QuickAnalysis.svg Quick Analysis.

Analyzing Results

  1. From the Object Tree, select the Results object
  2. Select File:Fem Result.svg Show result
  3. Choose among the different Result types to view the results
  4. The slider at the bottom can be used to alter the mesh visualization. This allows us to visualize the deformation experienced by the object, keep in mind that this is an approximation.
  5. To remove the results select File:Fem PurgeResults.png Purge results
Comparison to previous example file

If you select the Z diplacement result type, you can see that the obtained value is almos identical to the test example provided by FreeCAD. Differences may occur due to the quality of the mesh and the number of nodes it possesses.


Теперь мы закончили с основными принципами работы FEM Module.



Other languages: