FEM Workbench/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "Выше в основном описано как производить расчет МКЭ в FreeCAD FEM Workbench. Подробная справка о GUI инструм...")
Line 15: Line 15:
** Посмотреть Результаты в FreeCAD GUI.
** Посмотреть Результаты в FreeCAD GUI.


Выше в основном описано как производить расчет МКЭ в FreeCAD FEM Workbench. Подробная справка о GUI инструментах представлена ниже.
The above mainly describes how a FEA analysis is done inside FreeCAD FEM Workbench. For further documentation refer to the GUI Tools described later here.


As of FreeCAD version 0.15 and 0,16dev the FEM-Module can be used on Windows, Mac OSX and Linux platforms. Since FEM Workbench makes use of external software, the amount of manual intervention until the FEM workbench is ready to use will depend on the OS that you are using. Check out [[FEM_Install|FEM Install]].
As of FreeCAD version 0.15 and 0,16dev the FEM-Module can be used on Windows, Mac OSX and Linux platforms. Since FEM Workbench makes use of external software, the amount of manual intervention until the FEM workbench is ready to use will depend on the OS that you are using. Check out [[FEM_Install|FEM Install]].

Revision as of 03:26, 27 December 2015

FEM Верстак предоставляет современный набор инструментов для работы с Методом Конечных Элементов в FreeCAD. В основном это значит, что все инструменты для того чтобы выполнить МКЭ анализ собраны в одном GUI.


Шаги которые необходимо сделать чтобы произвести расчет МКЭ в FreeCAD FEM Workbench GUI:

  • Препроцессор
    • Моделирование геометрии, здесь FreeCAD уже является вполне развитым приложением.
    • Создать Расчет:
      • Создать FEM Сетку из геометрической модели.
      • Добавить Условия, такие как нагрузки и фиксаторы к расчетной модели.
      • Добавить Материал в расчетную модель
  • Решение уравнений
    • Решение системы уровнеий из FreeCAD GUI.
  • Постпроцессор
    • Посмотреть Результаты в FreeCAD GUI.

Выше в основном описано как производить расчет МКЭ в FreeCAD FEM Workbench. Подробная справка о GUI инструментах представлена ниже.

As of FreeCAD version 0.15 and 0,16dev the FEM-Module can be used on Windows, Mac OSX and Linux platforms. Since FEM Workbench makes use of external software, the amount of manual intervention until the FEM workbench is ready to use will depend on the OS that you are using. Check out FEM Install.


Tools

Template:FEM Tools

Tutorials

See FEM Tutorial

Links

FEM Install for a detailed description how to set up a working FEM Module.

FEM Mesh for further Information about the FEM Mesh in FreeCAD

FEM Solver for further Information about the interface between FEM Module and the Solver

FEM Project for more detailed informations about the Units, Limitations and the Development of FEM Module.


Arch Module
Robot Module