Exporter des STL ou OBJ
 Tutoriel
|
| Thème |
|---|
| Exportation de fichier STL ou OBJ |
| Niveau |
| Débutant |
| Temps d'exécution estimé |
| 20 minutes |
| Auteurs |
| r-frank |
| Version de FreeCAD |
| 0.16.6703 |
| Fichiers exemples |
| Voir aussi |
| None |
Introduction
Dans ce tutoriel, nous allons découvrir comment exporter les fichiers de FreeCAD au formats STL/OBJ. Les formats de maillage STL/OBJ n'ont aucune dimension, l'exportation par FreeCAD supposera que l'unité utilisée dans le modèle est exprimée en mm. Si cela n'est pas le cas, vous devrez convertir votre projet en mm .
Sample part
You can use your own FreeCAD file, but you could also create a quick test file by
- Opening FreeCAD
- Create a new document
- Switch to part workbench
- Insert a cube by clicking on
- Insert a cone by clicking on
- Select all two objects in the tree view
- Apply a fusion by clicking on
- Save your file
Export Method 1: Using "File > Export"
- Switch to mesh workbench or complete workbench
- Choose Edit → Preferences → Import-Export → Mesh Formats from the top menu
- Here you can specify the maximum mesh deviation (0,1 mm is default) which controls how "fine" your mesh will get
- Close dialogue with OK
- Select the solid to be exported in the tree view
- Choose File → Export... and set file type to for example "STL mesh (*.stl *.ast)"
- Type in your file name and don't forget the extension, choose Save
Export Method 2: Using the mesh workbench in FreeCAD
- Switch to mesh workbench
- Select the solid to be meshed in the tree view
- Choose Meshes →
Create Mesh from shape... from the top menu - Select one of the three available meshers and specify the available options, for more info refer to this page (Mesh from Shape)
- Choose OK and the mesh object will be created in the tree view (with green mesh icon)
- Select the mesh object in the tree view and right click on mesh object in the tree view
- Choose
Export mesh to export mesh - You will be promted to coose file name (default is the name of the mesh object) and the file type (default is "Binary STL (*.stl)")
- Choose Save and you are finished
Links