Drawing View/it: Difference between revisions

From FreeCAD Documentation
(Created page with "=== Modificare una vista esistente === Dispiegare l'oggetto Page nella struttura del Progetto, quindi selezionare la vista da modificare. I suoi parametri possono essere modi...")
Line 17: Line 17:


[[File:Drawing_View_Properties.png‎]]
[[File:Drawing_View_Properties.png‎]]
[[File:Drawing_View_Iso.png‎|150px|thumb|Isometric view with smooth lines visibility off]]
[[File:Drawing_View_Iso.png‎|150px|thumb|Vista isometrica con « smooth lines
visibility » disattivata]]
[[File:Drawing_View_Iso_SmoothLines.png‎‎|thumb|150px|Isometric view with smooth lines visibility on]]
[[File:Drawing_View_Iso_SmoothLines.png‎‎|thumb|150px|Vista isometrica con « smooth lines visibility » attivata]]


* '''Label''': changes the view's label in the Project tree. You can also click on the View in the tree and right-click → Rename, or press {{KEY|F2}}.
* '''Label''': changes the view's label in the Project tree. You can also click on the View in the tree and right-click → Rename, or press {{KEY|F2}}.

Revision as of 22:34, 19 December 2013

Inserisci vista

Posizione nel menu
Disegno → Inserisci Vista
Ambiente
Disegno, Completo
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Disegno A3

Questo strumento crea una nuova vista dell'oggetto selezionato e la posiziona nel foglio di disegno attivo.


Un foglio di disegno con due proiezioni, frontale e dall'alto, e una vista isometrica.

Utilizzo

Selezionare un oggetto nella vista 3D o nella struttura del progetto, quindi fare clic sullo strumento Inserisci vista del disegno. Per impostazione predefinita, viene inserita una vista dall'alto in scala 1:1 (scala reale), posizionata in alto a sinistra della pagina. Se la vista è troppo piccola o troppo grande per la pagina, può risultare non visibile.

Nell'albero del progetto viene aggiunto un oggetto View sotto l'oggetto Page. Per le viste successive, viene aggiunto al nome un numero a tre cifre. Fare clic sulla freccia davanti all'oggetto Page per dispiegarla e visualizzarne il contenuto.

Modificare una vista esistente

Dispiegare l'oggetto Page nella struttura del Progetto, quindi selezionare la vista da modificare. I suoi parametri possono essere modificati nella scheda Dati della finestra Proprietà di visualizzazione.

Vista isometrica con « smooth lines visibility » disattivata
Vista isometrica con « smooth lines visibility » attivata
  • Label: changes the view's label in the Project tree. You can also click on the View in the tree and right-click → Rename, or press F2.
  • Rotation: rotates the view. For example, an isometric view will require a 60 degree rotation (see also Direction parameter below)
  • Scale: sets the view scale.
  • X: sets the view's horizontal position on the page in millimeters.
  • Y: sets the view's vertical position on the page in millimeters. Please note that coordinate (0,0) is located at the top left of the page, so the higher the number, the lower in the page the view will be.
  • Direction: changes the view direction. It is set by xyz values that define a vector normal to the page. Top view will be (0,0,1), and isometric will be (1,1,1). Values can be negative.
  • Show Hidden Lines: toggles the hidden lines visibility on or off by selecting True or False.
  • Show Smooth Lines: toggles the smooth lines visibility on or off by selecting True or False. Smooth lines are also called tangency edges. These edges indicate surface changes between tangent surfaces.


Drawing View Wizard

To generate a drawing sheet with standard views automatically, use the Automatic drawing Macro.