Drawing: Proiettare le forme

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Drawing ProjectShape and the translation is 100% complete.

Proietta le forme

Posizione nel menu
Drawing → Proietta le forme
Ambiente
Drawing
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Nessuno

Descrizione

Questo strumento crea una proiezione dell'oggetto selezionato, l'oggetto sorgente, nella vista 3D.


Utilizzo

  1. Selezionare un oggetto nella vista 3D o nella struttura del progetto
  2. fare clic sullo strumento Proietta le forme
  3. impostare le opzioni desiderate
  4. cliccare su OK


Nell'albero del progetto viene aggiunto un oggetto Nome_proj. Per le proiezioni successive, viene aggiunto un numero a tre cifre.

Modificare una proiezione esistente

I parametri della proiezione possono essere modificati nella scheda Dati della vista combinata.

Base

  • DatiLabel :
  • DatiPlacement :


Projection

  • DatiDirection : definisce la direzione della proiezione. Questa viene determinata dai valori xyz che definiscono un vettore normale alla pagina. La vista dall'alto sul piano xy è (0,0,1). I valori possono anche essere negativi.
  • DatiHCompound :
  • DatiIso Line HCompound :
  • DatiIso Line VCompound :
  • DatiOut Line HCompound :
  • DatiOut Line VCompound :
  • DatiRg1 Line HCompound :
  • DatiRg1 Line VCompound :
  • DatiRg NLine HCompound :
  • DatiRg NLine VCompound :
  • DatiSource : indica la forma sorgente utilizzata
  • DatiVCompound :