Drawing API example/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Créer une seconde vue de l'objet, le but ici est de faire une rotation de 90 degrés.")
(Created page with "Créer une troisième vue de votre objet ici une vue isométrique. Nous activons les lignes cachées.")
Line 119: Line 119:
}}
}}


Créer une troisième vue de votre objet ici une vue isométrique. Nous activons les lignes cachées.
Create a third view on the same object but with an isometric view direction. The hidden lines are activated too.
{{Code|code=
{{Code|code=
App.ActiveDocument.addObject('Drawing::FeatureViewPart','ViewIso')
App.ActiveDocument.addObject('Drawing::FeatureViewPart','ViewIso')

Revision as of 12:54, 18 August 2019

Other languages:

Introduction

Le flux de travail de l'interface utilisateur graphique pour l' atelier Drawing est limité. Utiliser un script pour l'interface est plus intéressante.

Exemple simple

Vous devez en premier lieu charger les modules Pièce (Part) et Mise en plan (Drawing):

import FreeCAD, Part, Drawing

Créez une petite pièce.

Part.show(Part.makeBox(100,100,100).cut(Part.makeCylinder(80,100)).cut(Part.makeBox(90,40,100)).cut(Part.makeBox(20,85,100)))

Projection directe. G0 veut dire arête vive, G1 est une tangente continue.

Shape = App.ActiveDocument.Shape.Shape
[visibleG0,visibleG1,hiddenG0,hiddenG1] = Drawing.project(Shape)
print "visible edges:", len(visibleG0.Edges)
print "hidden edges:", len(hiddenG0.Edges)

Tout est projeté sur le plan Z:

print "Bnd Box shape: X=",Shape.BoundBox.XLength," Y=",Shape.BoundBox.YLength," Z=",Shape.BoundBox.ZLength
print "Bnd Box project: X=",visibleG0.BoundBox.XLength," Y=",visibleG0.BoundBox.YLength," Z=",visibleG0.BoundBox.ZLength

Un autre vecteur de projection

[visibleG0,visibleG1,hiddenG0,hiddenG1] = Drawing.project(Shape,App.Vector(1,1,1))

Projeter en format SVG

resultSVG = Drawing.projectToSVG(Shape,App.Vector(1,1,1))
print resultSVG

Exemple paramétrique

Créer le corps

import FreeCAD
import Part
import Drawing

# Create three boxes and a cylinder
App.ActiveDocument.addObject("Part::Box","Box")
App.ActiveDocument.Box.Length=100.00
App.ActiveDocument.Box.Width=100.00
App.ActiveDocument.Box.Height=100.00

App.ActiveDocument.addObject("Part::Box","Box1")
App.ActiveDocument.Box1.Length=90.00
App.ActiveDocument.Box1.Width=40.00
App.ActiveDocument.Box1.Height=100.00

App.ActiveDocument.addObject("Part::Box","Box2")
App.ActiveDocument.Box2.Length=20.00
App.ActiveDocument.Box2.Width=85.00
App.ActiveDocument.Box2.Height=100.00

App.ActiveDocument.addObject("Part::Cylinder","Cylinder")
App.ActiveDocument.Cylinder.Radius=80.00
App.ActiveDocument.Cylinder.Height=100.00
App.ActiveDocument.Cylinder.Angle=360.00
# Fuse two boxes and the cylinder
App.ActiveDocument.addObject("Part::Fuse","Fusion")
App.ActiveDocument.Fusion.Base = App.ActiveDocument.Cylinder
App.ActiveDocument.Fusion.Tool = App.ActiveDocument.Box1

App.ActiveDocument.addObject("Part::Fuse","Fusion1")
App.ActiveDocument.Fusion1.Base = App.ActiveDocument.Box2
App.ActiveDocument.Fusion1.Tool = App.ActiveDocument.Fusion
# Cut the fused shapes from the first box
App.ActiveDocument.addObject("Part::Cut","Shape")
App.ActiveDocument.Shape.Base = App.ActiveDocument.Box 
App.ActiveDocument.Shape.Tool = App.ActiveDocument.Fusion1
# Hide all the intermediate shapes 
Gui.ActiveDocument.Box.Visibility=False
Gui.ActiveDocument.Box1.Visibility=False
Gui.ActiveDocument.Box2.Visibility=False
Gui.ActiveDocument.Cylinder.Visibility=False
Gui.ActiveDocument.Fusion.Visibility=False
Gui.ActiveDocument.Fusion1.Visibility=False

Insérer un objet Page et assigner un modèle.

App.ActiveDocument.addObject('Drawing::FeaturePage','Page')
App.ActiveDocument.Page.Template = App.getResourceDir()+'Mod/Drawing/Templates/A3_Landscape.svg'

Créer une vue de votre objet "Shape", définir la position et l'assigner à une page.

App.ActiveDocument.addObject('Drawing::FeatureViewPart','View')
App.ActiveDocument.View.Source = App.ActiveDocument.Shape
App.ActiveDocument.View.Direction = (0.0,0.0,1.0)
App.ActiveDocument.View.X = 10.0
App.ActiveDocument.View.Y = 10.0
App.ActiveDocument.Page.addObject(App.ActiveDocument.View)

Créer une seconde vue de l'objet, le but ici est de faire une rotation de 90 degrés.

App.ActiveDocument.addObject('Drawing::FeatureViewPart','ViewRot')
App.ActiveDocument.ViewRot.Source = App.ActiveDocument.Shape
App.ActiveDocument.ViewRot.Direction = (0.0,0.0,1.0)
App.ActiveDocument.ViewRot.X = 290.0
App.ActiveDocument.ViewRot.Y = 30.0
App.ActiveDocument.ViewRot.Scale = 1.0
App.ActiveDocument.ViewRot.Rotation = 90.0
App.ActiveDocument.Page.addObject(App.ActiveDocument.ViewRot)

Créer une troisième vue de votre objet ici une vue isométrique. Nous activons les lignes cachées.

App.ActiveDocument.addObject('Drawing::FeatureViewPart','ViewIso')
App.ActiveDocument.ViewIso.Source = App.ActiveDocument.Shape
App.ActiveDocument.ViewIso.Direction = (1.0,1.0,1.0)
App.ActiveDocument.ViewIso.X = 335.0
App.ActiveDocument.ViewIso.Y = 140.0
App.ActiveDocument.ViewIso.ShowHiddenLines = True
App.ActiveDocument.Page.addObject(App.ActiveDocument.ViewIso)

Change something and update. The update process changes the view and the page.

App.ActiveDocument.View.X = 30.0
App.ActiveDocument.View.Y = 30.0
App.ActiveDocument.View.Scale = 1.5
App.ActiveDocument.recompute()

Accessing the bits and pieces

Get the SVG fragment of a single view

ViewSVG = App.ActiveDocument.View.ViewResult
print ViewSVG

Get the whole result page (it's a file in the document's temporary directory, only read permission)

print "Resulting SVG document: ",App.ActiveDocument.Page.PageResult
file = open(App.ActiveDocument.Page.PageResult,"r")
print "Result page is ",len(file.readlines())," lines long"

Important: free the file!

del file


Insert a view with your own content:

App.ActiveDocument.addObject('Drawing::FeatureView','ViewSelf')
App.ActiveDocument.ViewSelf.ViewResult = """<g id="ViewSelf"
  stroke="rgb(0, 0, 0)"
  stroke-width="0.35"
  stroke-linecap="butt"
  stroke-linejoin="miter"
  transform="translate(30,30)"
  fill="#00cc00"
  >

  <ellipse cx="40" cy="40" rx="30" ry="15"/>
  </g>"""
App.ActiveDocument.Page.addObject(App.ActiveDocument.ViewSelf)
App.ActiveDocument.recompute()

del ViewSVG

That leads to the following result:

General dimensioning and tolerancing

See also: Drawing Dimensioning Addon

Drawing dimensions an tolerances are still under development but you can get some basic functionality with a bit of work.

First you need to get the gdtsvg python module from here (WARNING: This could be broken at any time!):

https://github.com/jcc242/FreeCAD

To get a feature control frame, try out the following:

import gdtsvg as g # Import the module, I like to give it an easy handle
ourFrame = g.ControlFrame("0","0", g.Perpendicularity(), ".5", g.Diameter(), g.ModifyingSymbols("M"), "A",  
           g.ModifyingSymbols("F"), "B", g.ModifyingSymbols("L"), "C", g.ModifyingSymbols("I"))

Here is a good breakdown of the contents of a feature control frame: http://www.cadblog.net/adding-geometric-tolerances.htm

The parameters to pass to control frame are:

  1. X-coordinate in SVG-coordinate system (type string)
  2. Y-coordinate in SVG-coordinate system (type string)
  3. The desired geometric characteristic symbol (tuple, svg string as first, width of symbol as second, height of symbol as third)
  4. The tolerance (type string)
  5. (optional) The diameter symbol (tuple, svg string as first, width of symbol as second, height of symbol as third)
  6. (optional) The condition modifying material (tuple, svg string as first, width of symbol as second, height of symbol as third)
  7. (optional) The first datum (type string)
  8. (optional) The first datum's modifying condition (tuple, svg string as first, width of symbol as second, height of symbol as third)
  9. (optional) The second datum (type string)
  10. (optional) The second datum's modifying condition (tuple, svg string as first, width of symbol as second, height of symbol as third)
  11. (optional) The third datum (type string)
  12. (optional) The third datum's material condition (tuple, svg string as first, width of symbol as second, height of symbol as third)

The ControlFrame function returns a type containing (svg string, overall width of control frame, overall height of control frame)

To get a dimension, try out the following:

import gdtsvg
ourDimension = linearDimension(point1, point2, textpoint, dimensiontext, linestyle=getStyle("visible"), 
               arrowstyle=getStyle("filled"), textstyle=getStyle("text")

Inputs for linear dimension are:

  1. point1, an (x,y) tuple with svg-coordinates, this is one of the points you would like to dimension between
  2. point2, an (x,y) tuple with svg-coordinates, this is the second point you would like to dimension between
  3. textpoint, an (x,y) tuple of svg-coordinates, this is where the text of your dimension will be
  4. dimensiontext, a string containing the text you want the dimension to say
  5. linestyle, a string containing svg (i.e. css) styles, using the getStyle function to retrieve a preset string, for styling the how the lines look
  6. arrowstyle, a string containing svg (i.e. css) styles, using the getStyle function to retrieve a preset string, for styling how the arrows look
  7. textstyle, a string containing svg (i.e. css) styles, using the getStyle function to retrieve a preset string, for styling how the text looks

With those two, you can proceed as above for displaying them on the drawing page. This module is very buggy and can be broken at any given moment, bug reports are welcome on the github page for now, or contact jcc242 on the forums if you post a bug somewhere else.