Draft: Trimex

From FreeCAD Documentation
Revision as of 07:43, 14 November 2018 by Luc (talk | contribs) (Created page with "== Opţiuni ==")

Draft Trimex

poziția meniului
Draft → Trim/Extend
Ateliere
Draft, Arch
scurtătură
T R
Prezentat în versiune
-
A se vedea, de asemenea,
Part Extrude

Descriere

Acest instrument taie și extinde linii și polilinii, și extrudează fațete.

Cum se folosește

  1. Selectați filamentul/polilinia pe care doriți să-l tăiați sau extindeți sau selectați o fațetă pe care doriți să o extrudați
  2. Apăsați butonul Draft Trimex sau apăsați tatele T apoi R
  3. Faceți clic pe un punct din vizualizarea 3D

Opţiuni

  • trimming or extending is decided automatically from the position of your mouse
  • if you move the mouse cursor over another object, the trim/extend operation will snap to that object or segment
  • pressing SHIFT will constrain you to the segment currently being trimmed or extended
  • pressing ALT will invert the direction of the trimming
  • When the selected object is a face, or a face is selected from an existing object, the trimex tool switches to extrude mode. In extrude mode, pressing SHIFT frees the extrusion from the face normal and allows to snap elsewhere.

Scripting

Not available. See the Part Extrude tool.