Draft Trimex/ro: Difference between revisions
(Created page with "Acest instrument taie și extinde linii și polilinii, și extrudează fațete.") |
(Created page with "== Cum se folosește ==") |
||
| Line 8: | Line 8: | ||
[[Image:Draft trimex example.jpg|400px]] |
[[Image:Draft trimex example.jpg|400px]] |
||
== |
== Cum se folosește == |
||
# Select a wire you wish to trim or extend, or select a face you wish to extrude |
# Select a wire you wish to trim or extend, or select a face you wish to extrude |
||
Revision as of 07:41, 14 November 2018
|
|
| poziția meniului |
|---|
| Draft → Trim/Extend |
| Ateliere |
| Draft, Arch |
| scurtătură |
| T R |
| Prezentat în versiune |
| - |
| A se vedea, de asemenea, |
| Part Extrude |
Descriere
Acest instrument taie și extinde linii și polilinii, și extrudează fațete.
Cum se folosește
- Select a wire you wish to trim or extend, or select a face you wish to extrude
- Press the
Draft Trimex button, or press T then R keys - Click a point in the 3D view
Options
- trimming or extending is decided automatically from the position of your mouse
- if you move the mouse cursor over another object, the trim/extend operation will snap to that object or segment
- pressing SHIFT will constrain you to the segment currently being trimmed or extended
- pressing ALT will invert the direction of the trimming
- When the selected object is a face, or a face is selected from an existing object, the trimex tool switches to extrude mode. In extrude mode, pressing SHIFT frees the extrusion from the face normal and allows to snap elsewhere.
Scripting
Not available. See the Part Extrude tool.