Draft Ajuster ou prolonger

From FreeCAD Documentation
Revision as of 15:10, 5 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Réduire ou Etendre

Emplacement du menu
Draft → Trim/Extend
Ateliers
Draft
Raccourci par défaut
T R
Introduit dans la version
-
Voir aussi
Part Extrude

Description

Outil de réduction et extension de lignes et polylignes et extrude les faces.

The Trimex tool also extrudes faces created from closed wires. In this sense, it's similar to Part Extrude and to PartDesign Pad.

Wire segment extended, then wire segment trimmed; face extruded into a solid body

Utilisation

  1. Sélectionnez le text-top=Ligne à points multiples Wire que vous souhaitez réduire, ou étendre, ou sélectionnez la face que vous souhaitez extruder.
  2. Pressez le bouton text-top=Trimex Trimex, ou pressez la touche T puis R.
  3. Cliquez un point dans la vue 3D.

Trimming or extending is decided from the position of the pointer.

  • If the line is short it can be extended to approach and cross another line.
  • If the line is long and crosses another line, the excess length can be trimmed.
  • If the pointer is moved over another object or edge, the trim-extend operation will snap to that object, so that the trimmed or extended line ends exactly at the intersection with the object. This snapping works even without Draft Snap modes active.

A Draft Wire allows you to trim or extend any of its individual segments, which may affect the entire shape of the wire. In this case, the Trimex tool will work on the line segment that is closer to the pointer. Hold the Shift key to keep trimming or extending the current segment independently of the position of the pointer.

When the selected object is a face, the Trimex tool switches to extrude mode. In extrude mode the extrusion is done in the direction of the normal of the face. For example, if a rectangle lies on the XY plane, it should be extruded in the Z direction. To do this correctly, pressing the Z key may be necessary to constrain the distance to the Z direction. Alternatively, hold the Shift key to extrude in any direction that is not the normal.

Options

  • La réduction, ou l'extension, est effectuée automatiquement à la position de votre souris.
  • Si vous déplacez le curseur de la souris sur un autre objet, l'opération réduire et étendre s'accrochera à l'objet ou le segment.
  • En appuyant sur la touche SHIFT, il se crée une contrainte, sur le segment actuellement réduit ou étendu.
  • Appuyez sur ALT, pour faire inverser l'ordre de l'ajustement.
  • Lorsque l'objet sélectionné est une face', ou lorsqu'une face est sélectionnée dans un objet existant, le commutateur de réduction, ou d'extension se met en mode extrusion. En mode extrusion, appuyez sur la touche MAJ, contraint l'extrusion de la face normalement, et, force l'accrochage, de votre point, à l'emplacement le plus proche, du composant logiciel enfichable, indépendamment de la distance.

Script

Non disponible. Voir l'outil Extrusion.