Draft RasterUmschalten

From FreeCAD Documentation
Revision as of 20:45, 15 December 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Gitternetz umschalten

Menüeintrag
Draft → Utilities → Gitternetz umschalten
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Beschreibung

Dieser Befehl schaltet das Rasten auf die Knotenpunkte des Gitters (falls eingeschaltet) an/aus.

Draft Tray

Draft Tray which allows you to set the working plane and the grid

How to use

  1. Define the appearance of the grid in the Draft Preferences; go to the menu Edit → Preferences → Draft → Grid and snapping; set the "Grid size", "Grid spacing" and "Main line every" options, then press OK.
  2. Then right click on a Draft object and select Utilities → ToggleGrid.
  3. Or right click on an empty space on a toolbar, or go to the menu View → Toolbars, and click on the Draft Snap checkbox.
  4. Then press the Draft ToggleGrid button to make the grid visible.

Another way to define the grid is by setting the work plane.

  1. Press the Draft SelectPlane button.
  2. You don't have to set a new plane, you just need to change the "Grid spacing" and "Main line every" options, and the grid will update itself in real time.
  3. Then press Esc or the Close button to abort the command but keep the new grid.

The SelectPlane button is present in the Draft Tray toolbar, which only appears in the Draft and Arch Workbenches.