Draft Snap

From FreeCAD Documentation
Revision as of 22:36, 8 March 2014 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.

Snäppning i Skissmodulen har två lägen: ett aktivt läge och ett passivt läge.

Passivt läge

Du är automatiskt i passivt läge när du ritar. Om din musmarkör i passivt läge svävar över ett existerand objekt, så kommer din punkt att snäppas till den närmaste punkten på objektet. En öppen cirkelsymbol syns.

Options

  • File:Snap Lock.png Lock: turns snapping on/off globally
  • Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
  • Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
  • Pressing L while drawing locks the current angle of the line segment being drawn.
  • The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.