Draft Snap/sv: Difference between revisions
Renatorivo (talk | contribs) (Created page with "Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.") |
Renatorivo (talk | contribs) (Created page with "Snäppning i Skissmodulen har två lägen: ett aktivt läge och ett passivt läge. ===Passivt läge=== Du är automatiskt i passivt läge när du ritar. Om din musmarkör i p...") |
||
Line 3: | Line 3: | ||
[[Image:Draft_Snap_example.jpg]] |
[[Image:Draft_Snap_example.jpg]] |
||
Snäppning i Skissmodulen har två lägen: ett aktivt läge och ett passivt läge. |
|||
==Available snap locations== |
|||
* [[Image:Snap_Angle.png|32px]] '''Angle''': the special cardinal points of circles and arcs, at 45° and 90° |
|||
===Passivt läge=== |
|||
* [[Image:Snap_Center.png|32px]] '''Center''': the center point of arcs and circles |
|||
Du är automatiskt i passivt läge när du ritar. |
|||
* [[Image:Snap_Endpoint.png|32px]] '''Endpoint''': the endpoints of line, arc and spline segments |
|||
Om din musmarkör i passivt läge svävar över ett existerand objekt, så kommer din punkt att snäppas till den närmaste punkten på objektet. En öppen cirkelsymbol syns. |
|||
* [[Image:Snap_Extension.png|32px]] '''Extension''': on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap |
|||
* [[Image:Snap_Grid.png|32px]] '''Grid''': the nodes of the Draft grid, if visible. |
|||
* [[Image:Snap_Intersection.png|32px]] '''Intersection''': the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps |
|||
* [[Image:Snap_Midpoint.png|32px]] '''Midpoint''': the middle point of line and arc segments |
|||
* [[Image:Snap_Near.png|32px]] '''Near''': the closest point on the nearest object |
|||
* [[Image:Snap_Ortho.png|32px]] '''Ortho''': on imaginary lines that cross the last point, and extend at 0°, 45° and 90° |
|||
* [[Image:Snap_Parallel.png|32px]] '''Parallel''': on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap |
|||
* [[Image:Snap_Perpendicular.png|32px]] '''Perpendicular''': on line and arc segments, perpendicularly to the latest point |
|||
==Options== |
==Options== |
Revision as of 17:27, 18 February 2014
Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.
Snäppning i Skissmodulen har två lägen: ett aktivt läge och ett passivt läge.
Passivt läge
Du är automatiskt i passivt läge när du ritar. Om din musmarkör i passivt läge svävar över ett existerand objekt, så kommer din punkt att snäppas till den närmaste punkten på objektet. En öppen cirkelsymbol syns.
Options
- File:Snap Lock.png Lock: turns snapping on/off globally
- Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
- Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
- The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.