Draft Snap/sv: Difference between revisions
(Updating to match new version of source page) |
Renatorivo (talk | contribs) (Created page with "Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.") |
||
Line 1: | Line 1: | ||
Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt. |
|||
Snapping means "gluing" your next 3d point onto an existing point. Snapping is available with most [[Draft Module|Draft]] and [[Arch Module|Arch]] tools, and can be enabled and disabled globally with the [[#Options|Draft ToggleSnap]] command. Each snap location below can also be enabled or disabled individually by clicking the corresponding button on the snap toolbar. |
|||
[[Image:Draft_Snap_example.jpg]] |
[[Image:Draft_Snap_example.jpg]] |
Revision as of 17:26, 18 February 2014
Snäppa innebär att din nästa 3d punkt "klistras" på en existerande punkt.
Available snap locations
- File:Snap Angle.png Angle: the special cardinal points of circles and arcs, at 45° and 90°
- File:Snap Center.png Center: the center point of arcs and circles
- File:Snap Endpoint.png Endpoint: the endpoints of line, arc and spline segments
- File:Snap Extension.png Extension: on an imaginary line that extends beyond the endpoints of line segments. Hover the mouse over the desired object to activate its extension snap
- File:Snap Grid.png Grid: the nodes of the Draft grid, if visible.
- File:Snap Intersection.png Intersection: the intersection of 2 line or arc segments. Hover the mouse over the two desired bjects to activate their intersection snaps
- File:Snap Midpoint.png Midpoint: the middle point of line and arc segments
- File:Snap Near.png Near: the closest point on the nearest object
- File:Snap Ortho.png Ortho: on imaginary lines that cross the last point, and extend at 0°, 45° and 90°
- File:Snap Parallel.png Parallel: on an imaginary line parallel to a line segment. Hover the mouse over the desired object to activate its parallel snap
- File:Snap Perpendicular.png Perpendicular: on line and arc segments, perpendicularly to the latest point
Options
- File:Snap Lock.png Lock: turns snapping on/off globally
- Certain additional snap locations can be obtained by combining 2 snap locations, such as ortho + extension, that will give you a snap point at the intersection of their imaginary lines.
- Other, more complex snap locations can also be obtained by using constraining (by pressing SHIFT or X or Y or Z while drawing).
- The maximum distance at which a point is snapped a snap location is specified in the preferences, and can also be changed on-the-fly by pressing [ or ] keys.