Borrador Atrapar

From FreeCAD Documentation
Revision as of 17:52, 4 March 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Description

Ajustando quiere decir "pegando" tu siguiente punto 3D sobre un punto existente. El ajuste está disponible con la mayoría de herramientas de Boceto y Arquitectura, y se puede activar y desactivar globalmente con el comando Alternar ajuste. Cada ubicación de ajuste también se puede activar o desactivar individualmente seleccionando el botón correspondiente en la barra de herramientas de ajuste.

However, when these parameters need to be precise, it is possible to enter the exact Draft Coordinates in the dialog for the tool.

Another way of selecting more precise points is by using snapping. Snapping means "gluing" your next point onto an existing point or feature of another object.

Snapping is available with most Draft and Arch Workbench tools, and can be enabled and disabled globally with the File:Snap Lock.svg Draft ToggleSnap button, located in the snap toolbar, which can be made active with the menu View → Toolbars → Draft Snap. Each snap method can be enabled or disabled individually by clicking the corresponding button on the toolbar.

While using many snapping methods at the same time can be useful to draw your objects in the desired positions, it can also be problematic if your cursor attaches constantly to the wrong points. If this is the case, try using only one snapping method at the time.

Ubicaciones de ajuste disponibles

  • File:Snap Angle.png Ángulo: los puntos cardinales especiales de circunferencias y arcos, a 45º y 90º
  • File:Snap Center.png Centro: El punto centro de arcos y circunferencias
  • File:Snap Endpoint.png Punto final: Los puntos finales de segmentos de línea, arcos y splines
  • File:Snap Extension.png Extensión: sobre una línea imaginaria que se extiende de los puntos finales de los segmentos de línea. Mantén el ratón sobre el objeto deseado para activar su ajuste de extensión
  • File:Snap Grid.png Rejilla: Los nodos de la rejilla de Boceto, si es visible.
  • File:Snap Intersection.png Intersección: la intersección de 2 líneas o arcos. Mantén el ratón sobre los 2 objetos deseados para activar su ajuste de intersección
  • File:Snap Midpoint.png Punto medio: el punto medio de la línea o arco
  • File:Snap Near.png Cercano: el punto más próximo del objeto más cercano
  • File:Snap Ortho.png Orto: sobre líneas imaginarias que pasan por el último punto, y se extienden a 0º, 45º y 90º
  • File:Snap Parallel.png Paralelo: sobre una línea imaginaria paralela al segmento de línea. Mantén el ratón sobre el objeto deseado para activar el ajuste paralelo
  • File:Snap Perpendicular.png Perpendicular: sobre líneas y arcos, perpendicularmente al último punto

Advanced snapping

  • Additional snap locations can be obtained by combining two snapping methods, such as Draft Ortho and Draft Extension, that will give you a snap point at the intersection of their imaginary lines.
  • Other snap locations can be obtained by using Draft Constrains, that is, by holding Shift or pressing X, Y or Z while drawing.
  • Press Q while drawing to insert a "hold point" at the current location of the cursor. You will then be able to snap orthogonally to these hold points, and at the intersections of their orthogonal axes. If Draft Midpoint snapping is enabled, you will also be able to snap at the mid distance between any two hold points. introduced in version 0.17

Opciones

  • File:Snap Lock.png Bloquear: Activa / desactiva el ajuste globalmente
  • Ciertos ajustes adicionales se pueden obtener por combinación de 2 ubicaciones de ajuste, como orto + extensión, que te dan un punto de ajuste en la intersección de sus líneas imaginarias.
  • Otras ubicaciones de ajuste más complejas también se pueden obtener utilizando restricciones (presionando SHIFT o X o Y o Z mientras dibujamos).
  • Pressing L while drawing locks the current angle of the line segment being drawn.
  • La distancia máxima a la que un punto es detectado por el ajuste está especificada en las preferencias de Boceto, y también se puede cambiar al vuelo presionando las teclas [ o ].