Draft Einrasten

From FreeCAD Documentation
Revision as of 17:52, 4 March 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Description

Snapping bedeutet das "Rasten" des nächsten 3D-Punktes auf einen bereits existierenden Punkt. Diese Möglichkeit ist bei den meisten Draft- und Architektur-Werkzeugen gegeben und kann mit dem File:Snap Lock.png Draft_ToggleSnap-Kommando global ein- oder ausgeschaltet werden. Jede der unten stehenden Rastmöglichkeiten kann durch Klicken des entsprechenden Knopfes auf der Werkzeugleiste individuell ein- oder ausgeschaltet werden.

However, when these parameters need to be precise, it is possible to enter the exact Draft Coordinates in the dialog for the tool.

Another way of selecting more precise points is by using snapping. Snapping means "gluing" your next point onto an existing point or feature of another object.

Snapping is available with most Draft and Arch Workbench tools, and can be enabled and disabled globally with the File:Snap Lock.svg Draft ToggleSnap button, located in the snap toolbar, which can be made active with the menu View → Toolbars → Draft Snap. Each snap method can be enabled or disabled individually by clicking the corresponding button on the toolbar.

While using many snapping methods at the same time can be useful to draw your objects in the desired positions, it can also be problematic if your cursor attaches constantly to the wrong points. If this is the case, try using only one snapping method at the time.

Verfügbare Rastpositionen

Advanced snapping

  • Additional snap locations can be obtained by combining two snapping methods, such as Draft Ortho and Draft Extension, that will give you a snap point at the intersection of their imaginary lines.
  • Other snap locations can be obtained by using Draft Constrains, that is, by holding Shift or pressing X, Y or Z while drawing.
  • Press Q while drawing to insert a "hold point" at the current location of the cursor. You will then be able to snap orthogonally to these hold points, and at the intersections of their orthogonal axes. If Draft Midpoint snapping is enabled, you will also be able to snap at the mid distance between any two hold points. introduced in version 0.17

Optionen

  • File:Snap Lock.png Schloss: schaltet Rasten global ein oder aus
  • Bestimmte Rastpositionen erhält man, indem man 2 Rastpositionen kombiniert, wie z.B. Rechtwinklig und Extension, womit man einen Rastpunkt auf dem Schnittpunkt ihrer imaginären Linien erhält.
  • Andere, noch komplexere Rastpositionen erhält man durch Anwenden einer Beschränkung (durch Drücken von SHIFT oder X oder Y oder Z während des Zeichnens).
  • Der maximale Rastabstand, bei dem ein Punkt auf einen Rastpunkt gezogen werden kann, ist in den Einstellungen festgelegt und kann auch on-the-fly durch Drücken der Taste [ oder ] angepasst werden.