Draft Aimantation Perpendiculaire

From FreeCAD Documentation
Revision as of 15:11, 10 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Perpendicular

Emplacement du menu
Draft → Snap → Perpendicular
Ateliers
Draft, Arch
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
Aucun

Description

File:Draft Snap Perpendicular.png

Snapping the second point of a line to an invisible extension of another line, so that the first one is perpendicular to the second one

How to use

  1. Make sure File:Snap Lock.svg Draft ToggleSnap and File:Snap Perpendicular.svg Snap Perpendicular are turned on.
  2. Choose Draft Line to draw a shape. Enter the first point.
  3. Move the cursor over a line segment or edge of another object to select the point of perpendicularity.
  4. The edge will be highlighted in yellow, and a small white circle will indicate the point on the edge, or on its extension, to which your point will be attached.
  5. Click to attach your new point.