Draft Mittelpunkt

From FreeCAD Documentation
Revision as of 11:50, 2 November 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Jump to: navigation, search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎română • ‎русский • ‎Türkçe

Draft Midpoint.png {{{Name/de}}}

Menüeintrag
Draft → Snap → Midpoint
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
In der Version eingeführt
-
Siehe auch



Description

This snap mode lets you select the midpoint of elements.


Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near the midpoint of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected endpoint of target element


Notes

Snap mode can be used with

  • sketcher elements (lines, arcs)
  • draft elements (DWires, Lines, Arcs)
  • edges of shapes
  • edges of solids

Clicking on the snap-mode icon will toggle the snap mode on/off.