Draft Snap Midpoint/de: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "===Beschreibung=== Dieser Objektfang-Modus lässt Dich den Mittelpunkt von Elementen wählen.")
Line 4: Line 4:




===Description===
===Beschreibung===
Dieser Objektfang-Modus lässt Dich den Mittelpunkt von Elementen wählen.
This snap mode lets you select the midpoint of elements.





Revision as of 11:32, 4 January 2019

Draft Mittelpunkt

Menüeintrag
Entwurf → Objektfang → Mittelpunkt
Arbeitsbereich
Draft, Arch
Standardtastenkürzel
None
Eingeführt in Version
-
Siehe auch
Snap


Beschreibung

Dieser Objektfang-Modus lässt Dich den Mittelpunkt von Elementen wählen.


Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near the midpoint of the element you wish to attach your element to
  4. below on the right side of the cursor the symbol of the snap mode will appear
  5. click to attach your element to the selected endpoint of target element


Notes

Snap mode can be used with

  • sketcher elements (lines, arcs)
  • draft elements (DWires, Lines, Arcs)
  • edges of shapes
  • edges of solids

Clicking on the snap-mode icon will toggle the snap mode on/off.