Taslak Yüz Kaplama

From FreeCAD Documentation
Revision as of 23:04, 26 January 2019 by Skywalker21 (talk | contribs) (Created page with "{{Caption | Yüz kaplama ile katı duvarların yüzlerinden oluşturulmuş}}")

Yüz kaplama

Menü konumu
Taslak → Yüz kaplama
Tezgahlar
Taslak, Mimari
Varsayılan kısayol
F F
Versiyonda tanıtıldı
0.14
Ayrıca bkz
Parça Kutu, Mimari Duvar

Açıklama

Yüz kaplama aracı, katı bir nesnenin seçilen yüzlerinden bir yüzey nesnesi oluşturur. Parametriktir, yani eğer orijinal nesneyi değiştirirseniz, Facebinder buna göre güncellenir. Facebinder'ı hareket ettirip döndürürseniz, orijinal yüzlere bağlı kalacaktır.

Başka nesnelerden gelen bir yüz koleksiyonundan bir ekstrüzyon oluşturmak için kullanılabilir. Mimari tasarımda , örneğin duvar kağıdı veya duvar kaplaması gibi çeşitli duvarları kapsayan bir nesneyi inşa etmek tipik bir kullanımdır.

Yüz kaplama ile katı duvarların yüzlerinden oluşturulmuş

Nasıl kullanılır

  1. Nesnelerdeki yüzleri seçin (birkaç yüz seçmek için CTRL kullanın)
  2. Yüz kaplama, düğmesine basın veya F, F tuşlarına basın

The Facebinder can be edited by double clicking on the element in the tree view. Then you can change the faces that are part of the object.

  • To add a face, click on a face of a solid object in the 3D view, and then click on the Add button.
  • To remove a face, select one of the sub-elements in the list, and then click on the Remove button.
  • Press Esc or the OK button to complete the edition.

Options

This object has no options when it's being created. Only selected faces will be used to create the Facebinder object.

Properties

Data

  • VeriExtrusion: specifies an extrusion thickness to apply to all faces of the shape.
  • VeriRemove Splitter: if it is true it tries to fuse the internal intersections of the Facebinder when it extruded.
  • VeriSew: if it is true it tries to perform a topological sewing operation on the Facebinder when it extruded.

View

  • GörünümPattern: specifies a Draft Pattern with which to fill the face of the shape. This property only works if GörünümDisplay Mode is "Flat Lines".
  • GörünümPattern Size: specifies the size of the Draft Pattern.

Betik

Yüz kaplama aracı, aşağıdaki işlevler kullanılarak komut dosyalarında ve makrolar içinde kullanılabilir:

Facebinder = makeFacebinder(selectionset, name="Facebinder")
  • Verilen seçim kümesinden, FreeCADGui.Selection.getSelectionEx () yönteminin döndürdüğü gibi seçim nesnelerinin bir listesi olan bir yüz kaplama nesnesi oluşturur.
  • Sadece seçilen yüzler dikkate alınır.
  • Yeni oluşturulan nesneyi döndürür.

The thickness of the ShapeString can be added by overwriting its Extrusion attribute; the value is entered in millimeters.

The placement of the ShapeString can be changed by overwriting its Placement attribute, or by individually overwriting its Placement.Base and Placement.Rotation attributes.

Örnek:

import FreeCAD, FreeCADGui, Draft

# Insert a solid box
Box = FreeCAD.ActiveDocument.addObject("Part::Box", "Box")
Box.Length = 2300
Box.Width = 800
Box.Height = 1000

# Pick any two side faces, and then
selection = FreeCADGui.Selection.getSelectionEx()
Facebinder = Draft.makeFacebinder(selection)
Facebinder.Extrusion = 50
FreeCAD.ActiveDocument.recompute()

Facebinder.Placement.Base = FreeCAD.Vector(1000, -1000, 100)
Facebinder.ViewObject.ShapeColor = (0.99, 0.99, 0.4)