Draft Snap Endpoint: Difference between revisions
(Description and image) |
(Image caption) |
||
| Line 12: | Line 12: | ||
This method snaps to the endpoints of lines or edges of elements. |
This method snaps to the endpoints of lines or edges of elements. |
||
[[Image:Draft Snap Endpoint.png|400px|Snapping the second point of a line to the endpoint of a rectangle]] |
[[Image:Draft Snap Endpoint.png|400px|Snapping the second point of a line to the endpoint of an edge of a rectangle]] |
||
== How to use == <!--T:4--> |
== How to use == <!--T:4--> |
||
Revision as of 00:10, 23 November 2018
|
|
| Menu location |
|---|
| Draft → Snap → Endpoint |
| Workbenches |
| Draft, Arch |
| Default shortcut |
| None |
| Introduced in version |
| - |
| See also |
| Draft Snap, Draft ToggleSnap |
Description
This method snaps to the endpoints of lines or edges of elements.
Snapping the second point of a line to the endpoint of an edge of a rectangle
How to use
- Make sure snap mode is turned on
- Choose element to be inserted into the FreeCAD-document
- Move cursor near one of the endpoints you wish to attach your element to
- Below on the right side of the cursor the symbol of the snap mode will appear
- Click to attach your element to the selected endpoint of target element
Notes
Snap mode can be used with
- sketcher elements (lines, arcs)
- draft elements (DWires, Lines, Arcs, Bezier Curves)
- edges of shapes
- edges of solids
Clicking on the snap-mode icon will toggle the snap mode on/off.