Draft Ellipse/ru

Circle

Rectangle

Draft

Draft Ellipse
Системное название
Draft Ellipse
Расположение в меню
Черчение -> Эллипс
Верстаки
Draft, Arch
Быстрые клавиши
E L
Представлено в версии
-
См. также
Окружность

Описание

Инструмент Ellipse создает эллипс в текущей work plane, введя две точки, определяя угол прямоугольного прямоугольника, в котором будет располагаться эллипс. Он берет linewidth and color, предварительно установленный на вкладке «Задачи».

A Draft Ellipse can be turned into an elliptical arc by setting its ДанныеFirst Angle and ДанныеLast Angle properties to different values.

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

Использование

1. Нажмите кнопку Draft Ellipse или нажмите клавиши C, затем I
2. Щелкните первую точку на трехмерном изображении или введите coordinate
3. Нажмите вторую точку на трехмерном представлении или введите coordinate.

Опции

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

• To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, the coordinates of the second point are relative to the first point, else they are relative to the coordinate system origin.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
• Press F or click the Filled checkbox to toggle filled mode. If filled mode is on, the created ellipse will have ДанныеMake Face set to true and will have a filled face.
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating ellipses.
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

Notes

• A Draft Ellipse can be edited with the Draft Edit command.

Preferences

See also: Preferences Editor and Draft Preferences.

• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Ellipse instead of a Draft Ellipse.

Свойства

See also: Property editor.

A Draft Ellipse object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:

Data

Draft

• ДанныеArea (Area): (read-only) specifies the area of the face of the ellipse. The value will be 0.0 if ДанныеMake Face if false or the face cannot be created.
• ДанныеFirst Angle (Angle): specifies the angle of the first point of the ellipse, normally 0°.
• ДанныеLast Angle (Angle): specifies the angle of the last point of the ellipse, normally 0°.
• ДанныеMajor Radius (Length): specifies the major radius of the ellipse.
• ДанныеMake Face (Bool): specifies if the ellipse makes a face or not. If it is true a face is created, otherwise only the perimeter is considered part of the object. This property only works if the shape is a full ellipse.
• ДанныеMinor Radius (Length): specifies the minor radius of the ellipse.

View

Draft

• ВидPattern (Enumeration): specifies the Draft Pattern with which to fill the face of the ellipse. This property only works if ДанныеMake Face is true and if ВидDisplay Mode is Flat Lines.
• ВидPattern Size (Float): specifies the size of the Draft Pattern.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Ellipse use the make_ellipse method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeEllipse method.

ellipse = make_ellipse(majradius, minradius, placement=None, face=True, support=None)

• Creates an ellipse object with given major (majradius) and minor (minradius) radius in millimeters.
  • The bigger value will be used for the major radius (X axis) if no other placement is given.
• If placement is None the ellipse is created at the origin.
• If face is True, the ellipse will make a face, that is, it will appear filled.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

ellipse1 = Draft.make_ellipse(3000, 200)
ellipse2 = Draft.make_ellipse(700, 1000)

zaxis = App.Vector(0, 0, 1)
p3 = App.Vector(1000, 1000, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 90))

ellipse3 = Draft.make_ellipse(700, 1000, placement=place3)

doc.recompute()

Circle

Rectangle

Draft

Draft

• Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
• Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
• Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view

---

• Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid

---

• Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
• Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
• Context menu:
  • Layer container: Merge layer duplicates, Add new layer
  • Layer: Activate this layer, Select layer contents
  • Text: Open hyperlinks
  • Wire: Flatten
  • Working plane proxy: Write camera position, Write objects state

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков