Draft Draft2Sketch/ru

From FreeCAD Documentation
Revision as of 20:21, 11 February 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Draft2Sketch

Системное название
Draft Draft2Sketch
Расположение в меню
Черчение → Преобразовать в эскиз
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Этот инструмент преобразует Draft objects в Sketcher objects и наоборот.

Использование

  1. Выберите черновик или эскиз
  2. Нажмите кнопку Draft Draft2Sketch

Notes:

  • If you convert a Draft Wire, the resulting sketch will use point constraints for the nodes.
  • If you convert a Draft Rectangle, the resulting sketch will use point constraints for the corners, and horizontal and vertical constraints for the edges.
  • If you convert a Draft BezCurve, the resulting sketch will be approximated by a Sketcher BSpline, as the Sketcher Workbench doesn't support Bezier curves currently.
  • Non-Draft objects that are totally planar will also get converted to sketches.

Limitations

The conversion of an object that cannot be represented with a combination of straight lines, circular arcs, and B-Splines will usually fail, that is, the item will not appear in the sketch.

In the past, a Draft BSpline couldn't be converted directly to a sketch. A tool to perform this conversion was developed for the KicadStepUp Workbench, which would take a Draft BSpline and convert it into a series of Sketcher Arcs. See the forum thread BSplines to Shape2DView and Sketcher for more information.

Since FreeCAD 0.17, the conversion from Draft BSpline to Sketcher BSpline is possible. However, converting a spline to a series of arcs may still be useful for exporting geometry to applications that don't support B-Splines, like KiCad.

Options

There are no options for this tool. Either it works with the selected object or not.

Scripting

See also: Draft API and FreeCAD Scripting Basics.

There is no programming interface available for the Draft2Sketch tool. See the Sketcher Workbench documentation for the Sketcher API.