Borrador BorradorACroquis

From FreeCAD Documentation
Revision as of 08:09, 22 August 2019 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Boceto a Croquis

Ubicación en el Menú
Boceto → Boceto a Croquis
Entornos de trabajo
Boceto, Arquitectura
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

Esta herramienta convierte objetos de Boceto a objetos de Croquis, y viceversa.

Utilización

  1. Selecciona uno objeto de Boceto o un Croquis
  2. Presiona el botón Boceto a Croquis

Notes:

  • If you convert a Draft Wire, the resulting sketch will use point constraints for the nodes.
  • If you convert a Draft Rectangle, the resulting sketch will use point constraints for the corners, and horizontal and vertical constraints for the edges.
  • If you convert a Draft BezCurve, the resulting sketch will be approximated by a Sketcher BSpline, as the Sketcher Workbench doesn't support Bezier curves currently.
  • Non-Draft objects that are totally planar will also get converted to sketches.

Limitations

The conversion of an object that cannot be represented with a combination of straight lines, circular arcs, and B-Splines will usually fail, that is, the item will not appear in the sketch.

In the past, a Draft BSpline couldn't be converted directly to a sketch. A tool to perform this conversion was developed for the KicadStepUp Workbench, which would take a Draft BSpline and convert it into a series of Sketcher Arcs. See the forum thread BSplines to Shape2DView and Sketcher for more information.

Since FreeCAD 0.17, the conversion from Draft BSpline to Sketcher BSpline is possible. However, converting a spline to a series of arcs may still be useful for exporting geometry to applications that don't support B-Splines, like KiCad.

Opciones

  • Si conviertes un Contorno de Boceto, se aplicarán restricciones de punto a los nodos
  • Si conviertes un rectángulo de Boceto, se aplicarán restricciones de punto a las esquinas, y restricciones horizontal y vertical a las aristas
  • Los objetos que no sean del Boceto totalmente planos también se convertirán en croquis

There are no options for this tool. Either it works with the selected object or not.

Archivos de guión

No disponible, mira la documentación del módulo de Croquizado para saber como crear croquis con archivos de guión

Internally the Draft2Sketch tool uses two methods to convert back and forth from Draft to Sketch.

Convert objects to Sketch:

Draft.makeSketch(objectslist, autoconstraints=False, addTo=None, delete=False, name="Sketch", radiusPrecision=-1)

Convert objects to Draft:

Draft.draftify(objectslist, makeblock=False, delete=True)