Draft DXF/it: Revision history

10 February 2019

• curprev 21:1221:12, 10 February 2019‎ Renatorivo talk contribs‎ 6,139 bytes −27‎ No edit summary
• curprev 21:1021:10, 10 February 2019‎ Renatorivo talk contribs‎ 6,166 bytes −57‎ No edit summary
• curprev 21:1021:10, 10 February 2019‎ Renatorivo talk contribs‎ 6,223 bytes −781‎ Replaced content with "==Apertura=="
• curprev 21:0921:09, 10 February 2019‎ Renatorivo talk contribs‎ 7,004 bytes +78‎ Created page with "Attualmente sono supportati i seguenti tipi di oggetti DXF: * linee * polilinee e polilinee alleggerite * circonferenze * archi * layers (i layers contenenti gli oggetti vengo..."
• curprev 21:0821:08, 10 February 2019‎ Renatorivo talk contribs‎ 6,926 bytes +31‎ Created page with "Le altre entità DXF attualmente non sono importate perché in FreeCAD non vi è alcun oggetto corrispondente. Appena saranno implementate nuove funzionalità, sarà possibile..."
• curprev 21:0721:07, 10 February 2019‎ Renatorivo talk contribs‎ 6,895 bytes +26‎ Created page with "Questa funzione apre un file DXF, di qualunque versione dalla 12 alla 2007, in un nuovo documento."
• curprev 21:0521:05, 10 February 2019‎ Renatorivo talk contribs‎ 6,869 bytes +57‎ Created page with "== Descrizione == {{Emphasis|Vedere anche:}} Importare DXF in FreeCAD, Importare DWG in FreeCAD."
• curprev 21:0421:04, 10 February 2019‎ Renatorivo talk contribs‎ 6,812 bytes +215‎ No edit summary
• curprev 21:0121:01, 10 February 2019‎ Renatorivo talk contribs‎ 6,597 bytes +9‎ Created page with "{{docnav/it||SVG|Modulo Draft|IconC=Workbench_Draft.svg}}"
• curprev 16:0616:06, 10 February 2019‎ FuzzyBot talk contribs‎ 6,588 bytes +39‎ Updating to match new version of source page
• curprev 16:0116:01, 10 February 2019‎ FuzzyBot talk contribs‎ 6,549 bytes +26‎ Updating to match new version of source page

5 February 2019

• curprev 16:2416:24, 5 February 2019‎ FuzzyBot talk contribs‎ 6,523 bytes 0‎ Updating to match new version of source page
• curprev 16:0616:06, 5 February 2019‎ FuzzyBot talk contribs‎ 6,523 bytes +61‎ Updating to match new version of source page

8 January 2019

• curprev 13:1613:16, 8 January 2019‎ FuzzyBot talk contribs‎ 6,462 bytes +1,713‎ Updating to match new version of source page

2 August 2018

• curprev 20:4520:45, 2 August 2018‎ FuzzyBot talk contribs‎ 4,749 bytes −1‎ Updating to match new version of source page

13 December 2016

• curprev 22:0422:04, 13 December 2016‎ Renatorivo talk contribs‎ 4,750 bytes +1‎ No edit summary
• curprev 22:0422:04, 13 December 2016‎ Renatorivo talk contribs‎ 4,749 bytes −1‎ No edit summary

26 January 2015

• curprev 21:0321:03, 26 January 2015‎ Renatorivo talk contribs‎ 4,750 bytes −18‎ No edit summary
• curprev 20:5920:59, 26 January 2015‎ Renatorivo talk contribs‎ 4,768 bytes +1‎ No edit summary
• curprev 20:5620:56, 26 January 2015‎ Renatorivo talk contribs‎ 4,767 bytes +33‎ No edit summary
• curprev 20:5420:54, 26 January 2015‎ Renatorivo talk contribs‎ 4,734 bytes +10‎ No edit summary
• curprev 20:5420:54, 26 January 2015‎ Renatorivo talk contribs‎ 4,724 bytes +72‎ No edit summary
• curprev 20:4820:48, 26 January 2015‎ Renatorivo talk contribs‎ 4,652 bytes +9‎ No edit summary
• curprev 20:4820:48, 26 January 2015‎ Renatorivo talk contribs‎ 4,643 bytes +12‎ No edit summary
• curprev 20:4720:47, 26 January 2015‎ Renatorivo talk contribs‎ 4,631 bytes +15‎ No edit summary
• curprev 20:4620:46, 26 January 2015‎ Renatorivo talk contribs‎ 4,616 bytes +5‎ No edit summary
• curprev 18:0318:03, 26 January 2015‎ Renatorivo talk contribs‎ 4,611 bytes +2‎ Created page with "Le librerie devono essere scaricate da https://github.com/yorikvanhavre/Draft-dxf-importer Inoltre c'è un tutorial passo-passo molto completo che des..."
• curprev 18:0018:00, 26 January 2015‎ Renatorivo talk contribs‎ 4,609 bytes +3‎ Created page with "====Manualmente===="
• curprev 17:5917:59, 26 January 2015‎ Renatorivo talk contribs‎ 4,606 bytes +38‎ Created page with "A partire dalla versione 0.15, è sufficiente contrassegnare in Modifica-> Preferenze -> Importa/Esporta -> DXF/DWG -> "Consenti a FreeCAD di scaricare automaticamente le libr..."
• curprev 17:5317:53, 26 January 2015‎ Renatorivo talk contribs‎ 4,568 bytes +2‎ Created page with "====Automaticamente===="
• curprev 17:5317:53, 26 January 2015‎ Renatorivo talk contribs‎ 4,566 bytes +62‎ Created page with "'''Attenzione''': Per motivi di licenza, le librerie di importazione e esportazione DXF non fanno più parte del codice sorgente di FreeCAD. Per questo motivo, devono essere ..."
• curprev 17:4717:47, 26 January 2015‎ Renatorivo talk contribs‎ 4,504 bytes +5‎ Created page with "=== Installazione ==="
• curprev 14:4414:44, 26 January 2015‎ FuzzyBot talk contribs‎ 4,499 bytes +862‎ Updating to match new version of source page

23 December 2014

• curprev 18:3418:34, 23 December 2014‎ Renatorivo talk contribs‎ 3,637 bytes +11‎ Created page with "Tutorial: Installare l'importatore DXF"
• curprev 18:3218:32, 23 December 2014‎ FuzzyBot talk contribs‎ 3,626 bytes +57‎ Updating to match new version of source page

14 September 2014

• curprev 20:5720:57, 14 September 2014‎ Renatorivo talk contribs‎ 3,569 bytes −9‎ No edit summary
• curprev 17:0017:00, 14 September 2014‎ Renatorivo talk contribs‎ 3,578 bytes −65‎ No edit summary

14 May 2014

• curprev 09:1009:10, 14 May 2014‎ Renatorivo talk contribs‎ 3,643 bytes +68‎ No edit summary

14 February 2014

• curprev 21:2421:24, 14 February 2014‎ Renatorivo talk contribs‎ 3,575 bytes +3‎ Created page with "Category:User Documentation/it"
• curprev 21:2421:24, 14 February 2014‎ Renatorivo talk contribs‎ 3,572 bytes +348‎ Created page with "===Preferenze=== Nella scheda delle Preferenze (menu Modifica -> Preferenze -> Draft) si possono specificare i seguenti parametri di importazione: * ..."
• curprev 21:2321:23, 14 February 2014‎ Renatorivo talk contribs‎ 3,224 bytes +121‎ Created page with "===Esportazione=== Il file DXF esportato è compatibile con le versioni Autocad 12 e successive, pertanto si dovrebbe poterlo aprire con qualsiasi applicazione che supporti i..."
• curprev 21:2321:23, 14 February 2014‎ Renatorivo talk contribs‎ 3,103 bytes +2‎ Created page with "===Importazione=== Funziona allo stesso modo di ''Apertura'', ma aggiunge il contenuto del file DXF nel documento attivo invece di creare un nuovo documento."
• curprev 21:2321:23, 14 February 2014‎ Renatorivo talk contribs‎ 3,101 bytes +128‎ Created page with "===Apertura=== Questa funzione apre un file DXF, qualunque versione dalla 12 alla 2007, in un nuovo disegno. Attualmente sono supportati i seguenti tipi di oggetti DXF: * li..."
• curprev 21:1321:13, 14 February 2014‎ FuzzyBot talk contribs‎ 2,973 bytes −732‎ Updating to match new version of source page

23 April 2013

• curprev 20:2120:21, 23 April 2013‎ Renatorivo talk contribs‎ m 3,705 bytes −34‎ No edit summary

13 July 2012

• curprev 21:1121:11, 13 July 2012‎ Mario52 talk contribs‎ m 3,739 bytes +20‎ template fr

15 April 2012

• curprev 07:4407:44, 15 April 2012‎ Renatorivo talk contribs‎ 3,719 bytes +6‎ No edit summary

10 April 2012

• curprev 10:5410:54, 10 April 2012‎ Renatorivo talk contribs‎ 3,713 bytes +17‎ No edit summary
• curprev 10:5310:53, 10 April 2012‎ Renatorivo talk contribs‎ 3,696 bytes −20‎ No edit summary
• curprev 10:5210:52, 10 April 2012‎ Renatorivo talk contribs‎ 3,716 bytes +3,716‎ Created page with 'traduzione provvisoria (renatorivo) =Draft - File DXF= Image:Screenshot qcad.jpg ___TOC___ ===Apertura=== Questa funzione apre un file DXF (qualunque versione dalla 12 a…'