Draft Courbe de Bézier cubique

From FreeCAD Documentation
Revision as of 17:21, 1 September 2019 by David69 (talk | contribs) (Created page with "Les outils Courbe de Bézier Draft et Courbe de Bézier cubique Draft utilisent {{Emphasis|points de contrôle}} pour définir...")

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.


Courbe de Bézier cubique Draft

Emplacement du menu
Draft → Outils Bézier → Courbe de Bézier cubique
Ateliers
Atelier Draft, Atelier Arch
Raccourci par défaut
Aucun
Introduit dans la version
0.19
Voir aussi
Filaire Draft, BSpline Draft, Courbe de Bézier Draft

Description

L'outil Courbe de Bézier cubique Draft crée une Courbe de Bézier de troisième degré. C'est l'une des courbes de Bézier les plus couramment utilisées. Cet outil vous permet de créer une grosse spline composée de plusieurs segments de Bézier au 3ème degré, d’une manière similaire à l’outil Bézier d’Inkscape. Une courbe de Bezier de n'importe quel degré peut être créée avec Courbe de Bézier Draft.

Les outils Courbe de Bézier Draft et Courbe de Bézier cubique Draft utilisent points de contrôle pour définir la direction de la courbe. D'autre part, l'outil BSpline Draft spécifie les points exacts par lesquels la courbe passera.

File:Draft CubicBezCurve Example.png

Cubic Bezier curve defined by three control points

How to use

  1. Press the Draft CubicBezCurve button.
  2. Click a first point on the 3D view, and hold the mouse pointer.
  3. Drag the pointer to another point on the 3D view, and release the pointer.
  4. Move the pointer to another point on the 3D view to adjust the curvature of the spline, and click and hold on the point.
  5. Move the pointer to another point on the 3D view to adjust the final curvature of the spline, and then release the pointer. This creates a Bezier curve of 3rd degree, and continues drawing from the last point.
  6. Repeat the process of clicking, holding, dragging, and releasing to add points, and create further 3rd-degree Bezier segments.
  7. Press Esc or the Close button, to complete the edition.

Options

Properties

Data

View

Scripting

See also: Draft API and FreeCAD Scripting Basics.