Draft Constrain/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Pour contraindre, appuyer sur {{KEY|SHIFT}} pendant le dessin.")
(Created page with "Dans tous les outils qui supportent le mode contrainte, vous pouvez contraindre le prochain point verticalement ou horizontalement en relation avec le dernier point effectué....")
Line 3: Line 3:
[[Image:Draft_Constrain_example.jpg]]
[[Image:Draft_Constrain_example.jpg]]


In all tools that support constraining, you can force the next point to be constrained horizontally or vertically in relation to the last point entered. The vertical or horizontal constraining depends on where your mouse lies when you press {{KEY|SHIFT}}. If you are more north or south from the last point, it will be vertical. If you are more east or west, it will be horizontal. To change, just release {{KEY|SHIFT}} and press again at another location.
Dans tous les outils qui supportent le mode contrainte, vous pouvez contraindre le prochain point verticalement ou horizontalement en relation avec le dernier point effectué. La contrainte verticale ou horizontale dépend de l'endroit le pointeur de la souris se situe lorsque vous appuyez sur {{KEY|SHIFT}}. Si le pointeur est au nord ou au sud du dernier point, la contrainte sera verticale. S'il est à l'ouest ou à l'est, elle sera horizontale. Pour modifier, il suffit de relâcher {{KEY|SHIFT}} et d'appuyer à nouveau à un nouvel endroit.


Some tools, like [[Draft_Offset|offset]] and [[Draft_Trimex|trimex]] use constraining differently. They do not constrain vertically or horizontally but use a different way more adapted to the particular tool, like for example constraining the operation to a certain polyline segment.
Some tools, like [[Draft_Offset|offset]] and [[Draft_Trimex|trimex]] use constraining differently. They do not constrain vertically or horizontally but use a different way more adapted to the particular tool, like for example constraining the operation to a certain polyline segment.

Revision as of 17:36, 18 February 2014

Pour contraindre, appuyer sur SHIFT pendant le dessin.

Dans tous les outils qui supportent le mode contrainte, vous pouvez contraindre le prochain point verticalement ou horizontalement en relation avec le dernier point effectué. La contrainte verticale ou horizontale dépend de l'endroit où le pointeur de la souris se situe lorsque vous appuyez sur SHIFT. Si le pointeur est au nord ou au sud du dernier point, la contrainte sera verticale. S'il est à l'ouest ou à l'est, elle sera horizontale. Pour modifier, il suffit de relâcher SHIFT et d'appuyer à nouveau à un nouvel endroit.

Some tools, like offset and trimex use constraining differently. They do not constrain vertically or horizontally but use a different way more adapted to the particular tool, like for example constraining the operation to a certain polyline segment.