|Draft → Circular array|
|Introduced in version|
|Array, PolarArray, PathArray, PointArray, Clone|
The Draft CircularArray tool creates an array from a selected object placing the copies along concentric circumferences. This is like using PolarArray with a polar angle of 360 degrees, and creating several such concentric arrays.
To position copies in a rectangular grid use Array; to position in a polar pattern use PolarArray; to position copies along a path use PathArray; to position copies at specified points use PointArray; to create copies or clones, and manually place them use Move, Rotate, and Clone.
A circular array of an object.
How to use
- Select an object from which you wish to make the circular array.
- Press the task panel will open, but you still need to select an object to proceed. button. If no object is selected, the
- Choose the radial distance, which determines the distance from the center of the array to the next circular layer, and between subsequent circular layers.
- Choose the tangential distance, which determines the distance from one element in the array to the next element in the same circular layer. This distance determines how many elements will be in the array; if the number is small, there will be many tightly packed copies; if the number is large, there will only be a few copies. This distance cannot be zero.
- Choose the number of circular layers. The original object is considered one layer by itself. Minimum of 2, maximum of 99.
- Choose the symmetry number, which determines how the objects will be distributed in the array. Choose a number between 1 and 10.
- Choose the center of the axis of rotation. You can click on the 3D view, to simultaneously set the position of the center of rotation, and complete the command.
- Optionally, check the fuse or link options.
- Press to complete the command.
- By default, the axis of rotation is the positive Z axis
(0, 0, 1). This can be changed in the property editor after the object is created.
- Each element in the array is an exact clone of the original object, but the entire array is considered a single unit in terms of properties and appearance.
- This command creates the same object as the one created with the Array and PolarArray tools. Therefore, the array can be converted to orthogonal, polar, or circular just by changing its properties.
(0, 0, 0).
to set the center of the circular patterns to the origin
- If the Fuse checkbox is ticked, the resulting objects in the array will be fused into a single shape, if they touch or intersect each other.
- If the Use Links checkbox is ticked, the resulting objects in the array will be App Links instead of simple copies. This improves the memory usage of the array, as the App Link re-uses the shape of the original object, and does not create new shapes. If this option is used, the Fuse checkbox has no effect.
- Press or the button to abort the current command.
An Array object is based on Part Feature (
Part::Feature class), and thus shares all properties of the latter. In addition to the properties listed in Part Feature, the Array object has additional properties.
See the Array tool for the complete information.
array_list = make_circular_array(obj, r_distance, tan_distance, axis, center, number, symmetry, use_link)
- Creates an array from the objects contained in
obj, which can be a single object or a list of objects.
- The values of
tan_distancecorrespond to the radial and tangential distances of the elements in the array.
- The values of
centerare vectors that describe the direction of the axis of rotation, and a point through which that axis goes.
- The value of
numberis the number of circular layers in the circular pattern; the original object counts as the first layer.
- The value of
symmetryis an integer that participates in some calculations that affect the way the copies are distributed around the circumferences. Try different values, from 1 to 10, to get different placements of the copies.
use_linkis the created copies will be App Links and not regular copies.
array_listis returned with the new copies.
array_listis either a single object or a list of objects, depending on the input
import FreeCAD as App import Draft import draftobjects.circulararray as ca doc = App.newDocument() tri = Draft.makePolygon(3, 600) axis = App.Vector(0, 0, 1) center = App.Vector(0, 0, 0) arr = ca.make_circular_array(tri, 1800, 1200, axis, center, 4, 1) App.ActiveDocument.recompute()