Draft Snap Center/tr: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/tr |Name=Draft Center |Name/tr=Taslak Merkez |Workbenches=Taslak, Mimari |MenuLocation=Taslak → [[Draft Snap/tr|Yakalama]...")
(Created page with "=== Açıklama === Yayların ve çemberlerin orta noktasını yakalar.")
Line 9: Line 9:
}}
}}


===Description===
=== Açıklama ===
Yayların ve çemberlerin orta noktasını yakalar.
Snaps to the the center point of arcs and circles.


===Use===
===Use===

Revision as of 11:42, 17 January 2019

Taslak Merkez

Menü konumu
Taslak → Yakalama → Merkez
Tezgahlar
Taslak, Mimari
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
-
Ayrıca bkz
Hiçbiri

Açıklama

Yayların ve çemberlerin orta noktasını yakalar.

Use

  1. Make sure snap mode is turned on
  2. Choose element to be inserted into the FreeCAD-document
  3. Move cursor near one the arc/circle/circular edge you wish to attach your element to
  4. Below on the right side of the cursor the symbol of the snap mode will appear
  5. Click to attach your element to the selected endpoint of target element

Will also work with Draft Move and Draft Rotate.

Notes

Snap mode can be used with

  • sketcher elements (arcs, circles)
  • draft elements (arcs, circles)
  • edge of circular face of shape
  • edge of circular face of solid

Clicking on the snap-mode icon will toggle the snap mode on/off.