Entwurf Anordnung

From FreeCAD Documentation
Revision as of 10:11, 3 February 2017 by Holdi (talk | contribs)

Draft Array

Menu location
Draft → Array
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
PathArray

Beschreibung

Mit dem Werkzeug Feld (Array) kann ein Objekt mithilfe von Kopien seiner selbst zu Feldern mit linearer oder kreisförmiger Struktur erweitert werden.

Lineare Felder können 1- bis 3-dimensional sein: lineare Anordnung in eine (Reihe), zwei (Feld) oder drei (Felder übereinander) Richtungen. Die drei Richtungen sind unabhängig vom internen kartesischen Koordinatensystem und unabhängig voneinander wählbar.

Ein polares Feld besteht nur aus dem auf einem Kreis angeordneten Objekt und seinen Kopien.

Anwendung

  1. Wähle das für ein Feld vorgesehene Objekt.
  2. Klicke auf Draft Array.
  3. Wähle den Feld-Typ (DatenArray Type)
  4. Für den Feld-Typ linear (ortho) wähle:
    1. Zahl der Objekte:
      1. in erster Richtung (DatenNumber X)
      2. in zweiter Richtung (DatenNumber Y)
      3. in dritter Richtung (DatenNumber Z)
    2. Abstand zwischen den Objekten:
      1. in erster Richtung (DatenInterval X)
      2. in zweiter Richtung (DatenInterval Y)
      3. in dritter Richtung (DatenInterval Z);
      4. Anmerkung: Die drei Richtungen stimmen mit den Achsrichtungen des internen x-y-z-Koordinatensystems überein, wenn man für die erste nur einen Abstands-Wert für x, für die zweite nur einen für y und für die dritte nur einen für z einsetzt.
  5. Für den Feld-Typ polar (polar) wähle:
    1. Zahl der Objekte (DatenNumber Polar)
    2. Richtung der Feld-Achse (DatenAxis)
    3. Mittelpunkt des Feldes (DatenCenter)
    4. Sektorwinkel des Feldes (DatenAngle)
    5. Für jede neue Kopie des Objekts lässt sich die Feld-Achse neu positionieren (DatenInterval Axis). Bei Angabe eines z-Wertes (Feldachse sei zur z-Achse parallel) wandern die Kopien in dieser Richtung, sie liegen auf einer Schraubenlinie. Mit von Null verschiedenen y- und/oder z-Werten wird das Ergebnis unübersichtlich.
  6. Wähle wahr (true) für Vereinigen (DatenFuse), wenn die Objekte des Feldes zu einem einzigen Objekt vereinigt werden sollen.

Scripting

The Array tool can by used in macros and from the python console by using one of the following functions, depending if you wish to obtain simple, standalone copies of your base object, or a parametric array object, that stays linked to the original object.

Simple array

For rectangular array:

array (objectslist,xvector,yvector,xnum,ynum,[zvector,znum])

For polar array:

array (objectslist,center,totalangle,totalnum)
  • Creates an array of the objects contained in list (that can be an object or a list of objects) with, in case of rectangular array, xnum of iterations in the x direction at xvector distance between iterations, and same for y direction with yvector and ynum. In case of polar array, center is a vector, totalangle is the angle to cover (in degrees) and totalnum is the number of objects, including the original.
  • This function produces standalone copies of the base object(s)

Parametric array

For rectangular array:

makeArray (object,xvector,yvector,xnum,ynum)

For polar array:

makeArray (object,center,totalangle,totalnum)
  • Creates an array of the given object with, in case of rectangular array, xnum of iterations in the x direction at xvector distance between iterations, and same for y direction with yvector and ynum. In case of polar array, center is a vector, totalangle is the angle to cover (in degrees) and totalnum is the number of objects, including the original.
  • The result of this function is a parametric Draft Array object.

Example:

import FreeCAD,Draft
Draft.array(FreeCAD.ActiveDocument.ActiveObject,FreeCAD.Vector(2,0,0),FreeCAD.Vector(0,2,0),2,2)