Draft Arc

From FreeCAD Documentation
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page is a translated version of the page Draft Arc and the translation is 4% complete.
Outdated translations are marked like this.

Draft Arc

Menyplacering
Draft -> Arc
Arbetsbänkar
Draft, Arch
Standard genväg
A R
Introducerad i version
-
Se även
Draft Circle

Beskrivning

Detta verktyg ritar en cirkelbåge genom att välja fyra punkter: centrum, radien, startvinkel och slutvinkel.

The Draft Arc command creates a circular arc on the current working plane from a center, a radius, a start angle and an aperture angle. The radius and the angles can be defined by picking points.

A Draft Arc is in fact a Draft Circle with a DataFirst Angle that is not the same as its DataLast Angle.

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

Bruk

  • Markera punkter i ett tomt område i 3d vyn, eller på ett existernade objekt.
  • Cirkelbågsverktyget ärver Cirkelverktygets funktionalitet för de två första stegen, så du kan trycka på ALT för att välja en tangent istället för centrum eller radie.
  • Nedtryckning av CTRL kommer att snäppa din punkt till tillgängliga snäpp-punkter.
  • Nedtryckning av SKIFT kommer att begränsa din nya punkt i relation till föregående punkt.
  • Skriv in siffror för att manuellt mata in en koordinat.
  • Nedtryckning av ALT när du väljer slutvinkeln kommer att ändra riktningen till moturs.
  • Om du trycker på ESC så avbryts funktionen.

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

  • To manually enter the coordinates for the center enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
  • Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
  • Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating arcs.
  • Press S to switch Draft snapping on or off.
  • Press Esc or the Close button to abort the command.

Notes

  • A Draft Arc can be edited with the Draft Edit command.

Preferences

See also: Preferences Editor and Draft Preferences.

  • If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part Circle instead of a Draft Circle.

Properties

See Draft Circle.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Arc use the make_circle method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makeCircle method.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

arc1 = Draft.make_circle(200, startangle=0, endangle=90)
arc2 = Draft.make_circle(500, startangle=20, endangle=160)
arc3 = Draft.make_circle(750, startangle=-30, endangle=-150)

doc.recompute()