Arch Wall/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "==Proprietăți==")
(Updating to match new version of source page)
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{docnav| |[[Arch_Structure|Arch Structure]]|[[Arch_Module|Arch]]|IconR=Arch_Structure.png|IconC=Workbench_Arch.svg}}
{{GuiCommand|Name=Arch Wall|Workbenches=[[Arch Module|Arch]]|MenuLocation=Arch → Wall|Shortcut=W A|SeeAlso=[[Arch Structure|Arch Structure]]}}

<div class="mw-translate-fuzzy">
{{GuiCommand/ro|Name=Arch Wall|Name/ro=Arch Wall|Workbenches=[[Arch Module/ro|Arch]]|MenuLocation=Arch → Wall|Shortcut=W A|SeeAlso=[[Arch Structure/ro|Arch Structure]]}}
</div>


==Descriere==
==Descriere==


This tool builds a Wall object from scratch or on top of any other [[Part Module|shape]]-based or [[Mesh Module|mesh]]-based object. A wall can be built without any base object, in which case it behaves as a cubic volume, using length, width and height properties. When built on top of an existing shape, a wall can be based on:
Acest instrument construiește un obiect tip perete de la zero sau deasupra oricărui altul obeict tip [[Part Module|shape]]-based sau [[Mesh Module|mesh]]-based.Un perete poate fi construit fără obiect de bază, caz în care acesta se comportă ca un volum cubic, utilizând proprietăți de lungime, lățime și înălțime. Când este construit pe o formă existentă, un perete se poate baza pe:


<div class="mw-translate-fuzzy">
* A '''linear 2D object''', such as lines, wires, arcs or sketches, in which case you can change thickness, alignment(right, left or centered) and height. The length property has no effect.
* A '''linear 2D object''', such as lines, wires, arcs or sketches, in which case you can change thickness, alignment(right, left or centered) and height. The length property has no effect.
* A '''flat face''', in which case you can only change the height. Length and width properties have no effect. If the base face is vertical, however, the wall will use the width property instead of height, allowing you to build walls from space-like objects or mass studies.
* A '''flat face''', in which case you can only change the height. Length and width properties have no effect. If the base face is vertical, however, the wall will use the width property instead of height, allowing you to build walls from space-like objects or mass studies.
* A '''solid''', in which case length, width and height properties have no effect. The wall simply uses the underlying solid as its shape.
* A '''solid''', in which case length, width and height properties have no effect. The wall simply uses the underlying solid as its shape.
* A '''mesh''', in which case the underlying mesh must be a closed, manifold solid.
* A '''mesh''', in which case the underlying mesh must be a closed, manifold solid.
</div>


[[Image:Arch Wall example.jpg|780px]]
[[Image:Arch Wall example.jpg|780px]]
''Example of walls built from a line, a wire, a face, a solid and a sketch''
{{Caption|Walls built from a line, a wire, a face, a solid, and a sketch}}


Walls can also have additions or subtractions. Additions are other objects whose shapes are joined in this Wall's shape, while subtractions are subtracted. Additions and subtractions can be added with the [[Arch Add]] and [[Arch Remove]] tools. Additions and subtractions have no influence over wall parameters such as height and width, which can still be changed. Walls can also have their height automatic, if they are included into a higher-level object such as [[Arch Floor|floors]]. The height must be kept at 0, then the wall will adopt the height specified in the parent object.
Walls can also have additions or subtractions. Additions are other objects whose shapes are joined in this Wall's shape, while subtractions are subtracted. Additions and subtractions can be added with the [[Arch Add]] and [[Arch Remove]] tools. Additions and subtractions have no influence over wall parameters such as height and width, which can still be changed. Walls can also have their height automatic, if they are included into a higher-level object such as [[Arch Floor|floors]]. The height must be kept at 0, then the wall will adopt the height specified in the parent object.
Line 22: Line 28:
===Desenarea unui zid de la zero===
===Desenarea unui zid de la zero===


<div class="mw-translate-fuzzy">
# Press the {{KEY|[[Image:Arch Wall.png|16px]] [[Arch Wall]]}} button, or press {{KEY|W}} then {{KEY|A}} keys
# Press the {{KEY|[[Image:Arch Wall.png|16px]] [[Arch Wall]]}} button, or press {{KEY|W}} then {{KEY|A}} keys
# Click a first point on the 3D view, or type a [[Draft_Coordinates|coordinate]]
# Click a first point on the 3D view, or type a [[Draft_Coordinates|coordinate]]
# Click a second point on the 3D view, or type a [[Draft_Coordinates|coordinate]]
# Click a second point on the 3D view, or type a [[Draft_Coordinates|coordinate]]
</div>


===Desenarea unui zid deasupra unui obiect selectat===
===Desenarea unui zid deasupra unui obiect selectat===


<div class="mw-translate-fuzzy">
# Select one or more base geometry objects (Draft object, sketch, etc)
# Select one or more base geometry objects (Draft object, sketch, etc)
# Press the {{KEY|[[Image:Arch Wall.png|16px]] [[Arch Wall]]}} button, or press the {{KEY|W}} then {{KEY|A}} keys
# Press the {{KEY|[[Image:Arch Wall.png|16px]] [[Arch Wall]]}} button, or press the {{KEY|W}} then {{KEY|A}} keys
# Adjust needed properties such as height or width.
# Adjust needed properties such as height or width.
</div>


== Opţiuni ==
== Opţiuni ==


<div class="mw-translate-fuzzy">
* Walls share the common properties and behaviours of all [[Arch Component|Arch Components]]
* Walls share the common properties and behaviours of all [[Arch Component|Arch Components]]
* The height, width and alignment of a wall can be set during drawing, via the task panel
* The height, width and alignment of a wall can be set during drawing, via the task panel
Line 46: Line 57:
* Walls can also make use of [[Arch MultiMaterial|Multi-Materials]]. When using a multi-material, the wall will become multi-layer, using the thicknesses specified by the multi-material. Any layer with a thickness of zero will have its thickness defined automatically by the remaining space defined by the Wall's Width value, after subtracting the other layers.
* Walls can also make use of [[Arch MultiMaterial|Multi-Materials]]. When using a multi-material, the wall will become multi-layer, using the thicknesses specified by the multi-material. Any layer with a thickness of zero will have its thickness defined automatically by the remaining space defined by the Wall's Width value, after subtracting the other layers.
* Walls can be made to display blocks, instead of one single solid, by turning their '''Make Blocks''' property on. The size and offset of blocks can be configured with different properties, and the amount of blocks is automatically calculated. {{Version|0.18}}
* Walls can be made to display blocks, instead of one single solid, by turning their '''Make Blocks''' property on. The size and offset of blocks can be configured with different properties, and the amount of blocks is automatically calculated. {{Version|0.18}}
</div>


==Ancorarea==
==Ancorarea==


<div class="mw-translate-fuzzy">
Snapping funcționează un pic diferit cu pereții arcului decât alte obiecte Arch și Draft. Dacă un perete are un obiect de bază, snapping-ul se ancorează la obiectul de bază, în loc de geometria peretelui, permițând ușor alinierea pereților prin linia de bază. Dacă, totuși, doriți să vă apropiați de geometria peretelui, apăsând {{KEY | CTRL}} se va comuta pe obiect de perete.
Snapping funcționează un pic diferit cu pereții arcului decât alte obiecte Arch și Draft. Dacă un perete are un obiect de bază, snapping-ul se ancorează la obiectul de bază, în loc de geometria peretelui, permițând ușor alinierea pereților prin linia de bază. Dacă, totuși, doriți să vă apropiați de geometria peretelui, apăsând {{KEY | CTRL}} se va comuta pe obiect de perete.
</div>


[[Image:Arch wall snap.jpg|780px]]
[[Image:Arch wall snap.jpg|780px]]
<div class="mw-translate-fuzzy">
[[Image:Arch wall snap.jpg|780px]]
</div>


==Proprietăți==
==Proprietăți==


<div class="mw-translate-fuzzy">
Wall objects inherit the properties of [[Part Module|Part]] objects, and also have the following extra properties:
Obiectele de pe perete moștenesc proprietățile obiectelor [[Part Module | Part]] și au, de asemenea, următoarele proprietăți suplimentare:
* {{PropertyData|Align}}: The alignment of the wall on its baseline: Left, right or center
* {{PropertyData|Base}}: The base object this wall is built on
* {{PropertyData | Align}}: Alinierea peretelui pe linia de bază: Stânga, dreapta sau centru
* {{PropertyData|Face}}: The index of the face from the base object to use. If the vaue is not set or 0, the whole object is used
* {{PropertyData | Base}}: Obiectul de bază pe care este construit acest perete
* {{PropertyData|Force Wire}}: If True, and the wall is based on a face, only the border wire of the face is used, resulting in a wall bordering the face
* {{PropertyData | Face}}: Indicele feței de la obiectul de bază de folosit. Dacă vaue nu este setat sau 0, întregul obiect este utilizat
* {{PropertyData | Force Wire}}: Dacă este adevărat, iar peretele se bazează pe o față, se folosește numai firul frontal al feței, rezultând un perete care se învecinează cu fața
* {{PropertyData|Length}}: The length of the wall (not used when the wall is based on an object)
* {{PropertyData|Width}}: The width of the wall (not used when the wall is based on a face)
* {{PropertyData | Lungime}}: lungimea peretelui (nu este utilizată atunci când peretele se bazează pe un obiect)
* {{PropertyData | Lățime}}: Lățimea peretelui (nu este utilizată atunci când peretele se bazează pe o față)
* {{PropertyData|Height}}: The height of the wall (not used when the wall is based on a solid). If no height is given, and the wall is inside a [[Arch Floor|floor]] object with its height defined, the wall will automatically take the value of the floor height.
* {{PropertyData | Height}}: Înălțimea peretelui (nu se utilizează atunci când peretele se bazează pe un solid). Dacă nu este dată nici o înălțime, iar peretele se află în interiorul unui obiect [[Arch Floor/ro| floor]] cu înălțimea definită, peretele va lua în mod automat valoarea înălțimii podelei.
* {{PropertyData|Normal}}: An extrusion direction for the wall. If set to (0,0,0), the extrusion direction is automatic.
* {{PropertyData|Offset}}: This specifies the distance between the wall and its baseline. Works only if the Align property is set to Right or Left.
* {{PropertyData | Normal}}: O direcție de extrudare pentru perete. Dacă este setată la (0,0,0), direcția de extrudare este automată.
* {{PropertyData | Offset}}: Aceasta specifică distanța dintre perete și linia de bază. Funcționează numai dacă proprietatea Align (Aliniere) este setată la dreapta sau la stânga.
</div>


{{Version|0.18}}:
{{Version|0.18}}:
Line 77: Line 96:
* {{PropertyData|Count Broken}}: The number of broken blocks (read-only)
* {{PropertyData|Count Broken}}: The number of broken blocks (read-only)


<div class="mw-translate-fuzzy">
==Scripting==
== Scripturi ==
</div>


<div class="mw-translate-fuzzy">
The Wall tool can by used in [[macros]] and from the python console by using the following function:
Instrumentul Wall tool poate fi utilizat în [[macros]] și de la consola python utilizând următoarele funcții:
</div>
{{Code|code=
{{Code|code=
makeWall ( [obj],[length],[width],[height],[align],[face],[name] )
Wall = makeWall(baseobj=None, length=None, width=None, height=None, align="Center", face=None, name="Wall")
}}
}}

<div class="mw-translate-fuzzy">
* Creates a wall based on the given object, which can be a sketch, a draft object, a face or a solid. align can be "Center","Left" or "Right". If you provide no base object, then you can use numeric values for length, width and height. Face can be used to give the index of a face from the underlying object, to build this wall on, instead of using the whole object.
* Creates a wall based on the given object, which can be a sketch, a draft object, a face or a solid. align can be "Center","Left" or "Right". If you provide no base object, then you can use numeric values for length, width and height. Face can be used to give the index of a face from the underlying object, to build this wall on, instead of using the whole object.
* Returns the created wall, or None if the operation failed.
* Returns the created wall, or None if the operation failed.
</div>


Exempluː
Example:
{{Code|code=
{{Code|code=
import FreeCAD, Draft, Arch
import FreeCAD, Draft, Arch

baseline = Draft.makeLine(FreeCAD.Vector(0,0,0),FreeCAD.Vector(2,0,0))
p1 = FreeCAD.Vector(0, 0, 0)
Arch.makeWall(baseline,None,0.1,2)
p2 = FreeCAD.Vector(2000, 0, 0)
baseline = Draft.makeLine(p1, p2)
Wall1 = Arch.makeWall(baseline, length=None, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()

Wall2 = Arch.makeWall(None, length=2000, width=200, height=1000)
Draft.move(Wall2, FreeCAD.Vector(0, -1000, 0))
FreeCAD.ActiveDocument.recompute()
}}
}}

<div class="mw-translate-fuzzy">
[[Category:Arch/ro]]
</div>

{{Arch Tools navi}}

{{Userdocnavi}}

Revision as of 08:05, 29 April 2019

Arch Wall

poziția meniului
Arch → Wall
Ateliere
Arch
scurtătură
W A
Prezentat în versiune
-
A se vedea, de asemenea,
Arch Structure

Descriere

Acest instrument construiește un obiect tip perete de la zero sau deasupra oricărui altul obeict tip shape-based sau mesh-based.Un perete poate fi construit fără obiect de bază, caz în care acesta se comportă ca un volum cubic, utilizând proprietăți de lungime, lățime și înălțime. Când este construit pe o formă existentă, un perete se poate baza pe:

  • A linear 2D object, such as lines, wires, arcs or sketches, in which case you can change thickness, alignment(right, left or centered) and height. The length property has no effect.
  • A flat face, in which case you can only change the height. Length and width properties have no effect. If the base face is vertical, however, the wall will use the width property instead of height, allowing you to build walls from space-like objects or mass studies.
  • A solid, in which case length, width and height properties have no effect. The wall simply uses the underlying solid as its shape.
  • A mesh, in which case the underlying mesh must be a closed, manifold solid.

Walls built from a line, a wire, a face, a solid, and a sketch

Walls can also have additions or subtractions. Additions are other objects whose shapes are joined in this Wall's shape, while subtractions are subtracted. Additions and subtractions can be added with the Arch Add and Arch Remove tools. Additions and subtractions have no influence over wall parameters such as height and width, which can still be changed. Walls can also have their height automatic, if they are included into a higher-level object such as floors. The height must be kept at 0, then the wall will adopt the height specified in the parent object.

When several walls should intersect, you need to place them into a floor to have their geometry intersected.

Cum se folosește

Desenarea unui zid de la zero

  1. Press the Arch Wall button, or press W then A keys
  2. Click a first point on the 3D view, or type a coordinate
  3. Click a second point on the 3D view, or type a coordinate

Desenarea unui zid deasupra unui obiect selectat

  1. Select one or more base geometry objects (Draft object, sketch, etc)
  2. Press the Arch Wall button, or press the W then A keys
  3. Adjust needed properties such as height or width.

Opţiuni

  • Walls share the common properties and behaviours of all Arch Components
  • The height, width and alignment of a wall can be set during drawing, via the task panel
  • When snapping a wall to an existing wall, both walls will be joined into one. The way the two walls are joined depends on their properties: If they have the same width, height and alignment, and if the option "join base sketches" is enabled in the Arch preferences, the resulting wall will be one object based on a sketch made of several segments. Otherwise, the latter wall will be added to the first one as addition.
  • Press X, Y or Z after the first point to constrain the second point on the given axis.
  • To enter coordinates manually, simply enter the numbers, then press ENTER between each X, Y and Z component.
  • Press R or click the checkbox to check/uncheck the Relative button. If relative mode is on, the coordinates of the second point are relative to the first one. If not, they are absolute, taken from the (0,0,0) origin point.
  • Press SHIFT while drawing to constrain your second point horizontally or vertically in relation to the first one.
  • Press ESC or the Cancel button to abort the current command.
  • Double-clicking on the wall in the tree view after it is created allows you to enter edit mode and access and modify its additions and subtractions
  • Multi-layer walls can be easily created by building several walls from the same baseline. By setting their Align property to either left or right, and specifying an Offset value, you can effectively construct several wall layers. Placing a window in such a wall layer will propagate the opening to the other wall layers based on the same baseline.
  • Walls can also make use of Multi-Materials. When using a multi-material, the wall will become multi-layer, using the thicknesses specified by the multi-material. Any layer with a thickness of zero will have its thickness defined automatically by the remaining space defined by the Wall's Width value, after subtracting the other layers.
  • Walls can be made to display blocks, instead of one single solid, by turning their Make Blocks property on. The size and offset of blocks can be configured with different properties, and the amount of blocks is automatically calculated. introduced in version 0.18

Ancorarea

Snapping funcționează un pic diferit cu pereții arcului decât alte obiecte Arch și Draft. Dacă un perete are un obiect de bază, snapping-ul se ancorează la obiectul de bază, în loc de geometria peretelui, permițând ușor alinierea pereților prin linia de bază. Dacă, totuși, doriți să vă apropiați de geometria peretelui, apăsând CTRL se va comuta pe obiect de perete.

Proprietăți

Obiectele de pe perete moștenesc proprietățile obiectelor Part și au, de asemenea, următoarele proprietăți suplimentare:

  • Date Align: Alinierea peretelui pe linia de bază: Stânga, dreapta sau centru
  • Date Base: Obiectul de bază pe care este construit acest perete
  • Date Face: Indicele feței de la obiectul de bază de folosit. Dacă vaue nu este setat sau 0, întregul obiect este utilizat
  • Date Force Wire: Dacă este adevărat, iar peretele se bazează pe o față, se folosește numai firul frontal al feței, rezultând un perete care se învecinează cu fața
  • Date Lungime: lungimea peretelui (nu este utilizată atunci când peretele se bazează pe un obiect)
  • Date Lățime: Lățimea peretelui (nu este utilizată atunci când peretele se bazează pe o față)
  • Date Height: Înălțimea peretelui (nu se utilizează atunci când peretele se bazează pe un solid). Dacă nu este dată nici o înălțime, iar peretele se află în interiorul unui obiect floor cu înălțimea definită, peretele va lua în mod automat valoarea înălțimii podelei.
  • Date Normal: O direcție de extrudare pentru perete. Dacă este setată la (0,0,0), direcția de extrudare este automată.
  • Date Offset: Aceasta specifică distanța dintre perete și linia de bază. Funcționează numai dacă proprietatea Align (Aliniere) este setată la dreapta sau la stânga.

introduced in version 0.18:

  • DateMake Blocks: Enable this to make the wall generate blocks
  • DateBlock Length: The length of each block
  • DateBlock Height: The height of each block
  • DateOffset First: The horizontal offset of the first line of blocks
  • DateOffset Second: The horizontal offset of the second line of blocks
  • DateJoint: The size of the joints between each block
  • DateCount Entire: The number of entire blocks (read-only)
  • DateCount Broken: The number of broken blocks (read-only)

Scripturi

Instrumentul Wall tool poate fi utilizat în macros și de la consola python utilizând următoarele funcții:

Wall = makeWall(baseobj=None, length=None, width=None, height=None, align="Center", face=None, name="Wall")
  • Creates a wall based on the given object, which can be a sketch, a draft object, a face or a solid. align can be "Center","Left" or "Right". If you provide no base object, then you can use numeric values for length, width and height. Face can be used to give the index of a face from the underlying object, to build this wall on, instead of using the whole object.
  • Returns the created wall, or None if the operation failed.

Exempluː

import FreeCAD, Draft, Arch

p1 = FreeCAD.Vector(0, 0, 0)
p2 = FreeCAD.Vector(2000, 0, 0)
baseline = Draft.makeLine(p1, p2)
Wall1 = Arch.makeWall(baseline, length=None, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()

Wall2 = Arch.makeWall(None, length=2000, width=200, height=1000)
Draft.move(Wall2, FreeCAD.Vector(0, -1000, 0))
FreeCAD.ActiveDocument.recompute()