Architektura Schody

From FreeCAD Documentation
Revision as of 15:43, 3 May 2017 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Arch Schody

Umístění Menu
Arch → Stairs
Pracovní stoly
Modul architektura
Výchozí zástupce
S R
Představen ve verzi
-
Viz také
Nikdo

Description

The stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight line, in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope.

Popis

Nástroj Schody pro vytváření a definování schodišť jakéhokoliv typu

See the Stairs entry in wikipedia for a definition of the different terms used to describe parts of stairs.

Na obrázku nahoře jsou vytvořena dvě schodiště, jedno s plnou strukturou a podestou a druhé s jednotlivými stupni.

Options

Použití

Stiskněte tlačítko Schody nebo klávesy S, R

  1. Nastavte požadované vlastnosti. Některé z části schodiště, jako je struktura, se nemusí projevit okamžitě, pokud je to u některých vlastností nemožné, jako je třeba tloušťka struktury nastavená na nulu.

Vlastnosti

Základ

  • ÚdajeAlign: The alignment of these stairs on their baseline, if applicable.
  • ÚdajeBase: The baseline of these stairs, if any.
  • ÚdajeHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
  • ÚdajeLength: The total length of these stairs if no baseline is defined.
  • ÚdajeWidth: The width of these stairs.

Steps

  • ÚdajeNosing: The size of the nosing.
  • ÚdajeNumber of Steps: The numbers of steps (risers) in these stairs.
  • ÚdajeRiser Height: The height of the risers.
  • ÚdajeTread Depth: The depth of the treads.
  • ÚdajeTread Thickness: The thickness of the treads.

Structure

  • ÚdajeLandings: The type of landings.
  • ÚdajeStringer Offset: The offset between the border of the stairs and the structure.
  • ÚdajeStringer Width: The width of the stringers.
  • ÚdajeStructure: The type of structure of these stairs.
  • ÚdajeStructure Thickness: The thickness of the structure.
  • ÚdajeWinders: The type of winders.

Scripting

Stairs can be created from python scripts and macros by using the following function:

makeStairs([base], [length], [width], [height], [steps])
  • Creates a stairs object with the given attributes.
  • Returns the new stairs object.

Example:

import Arch
makeStairs(length=5, width=1.2, height=3, steps=14)

Omezení

  • Nejsou dostupné před verzí FreeCAD 0.14
  • V současnosti jsou dostupné pouze přímé schody
  • Podívejte se na forum zdroj na kruhové schody.
  • Podívejte se na následující forum oznámení.