Arch Stairs/cs: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{GuiCommand/cs|Name=Arch_Stairs|Name/cs=Arch Schody|Workbenches=Modul architektura|MenuLocation=Arch → Stairs|Shortcut=S R}}") |
Renatorivo (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
{{GuiCommand/cs|Name=Arch_Stairs|Name/cs=Arch Schody|Workbenches=[[Arch Module/cs|Modul architektura]]|MenuLocation=Arch → Stairs|Shortcut=S R}} |
{{GuiCommand/cs|Name=Arch_Stairs|Name/cs=Arch Schody|Workbenches=[[Arch Module/cs|Modul architektura]]|MenuLocation=Arch → Stairs|Shortcut=S R}} |
||
==Description== |
==Description== |
||
The stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight [[Draft Line|line]], in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope. |
The stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight [[Draft Line|line]], in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope. |
||
==Popis== |
|||
Nástroj Schody pro vytváření a definování schodišť jakéhokoliv typu |
|||
See the [http://en.wikipedia.org/wiki/Stairs Stairs entry in wikipedia] for a definition of the different terms used to describe parts of stairs. |
See the [http://en.wikipedia.org/wiki/Stairs Stairs entry in wikipedia] for a definition of the different terms used to describe parts of stairs. |
||
Revision as of 21:25, 22 May 2014
|
|
| Umístění Menu |
|---|
| Arch → Stairs |
| Pracovní stoly |
| Modul architektura |
| Výchozí zástupce |
| S R |
| Představen ve verzi |
| - |
| Viz také |
| Nikdo |
Description
The stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight line, in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope.
Popis
Nástroj Schody pro vytváření a definování schodišť jakéhokoliv typu
See the Stairs entry in wikipedia for a definition of the different terms used to describe parts of stairs.
Na obrázku nahoře jsou vytvořena dvě schodiště, jedno s plnou strukturou a podestou a druhé s jednotlivými stupni.
Použití
Stiskněte tlačítko 
Schody nebo klávesy S, R
- Nastavte požadované vlastnosti. Některé z části schodiště, jako je struktura, se nemusí projevit okamžitě, pokud je to u některých vlastností nemožné, jako je třeba tloušťka struktury nastavená na nulu.
Vlastnosti
Základ
- ÚdajeAlign: The alignment of these stairs on their baseline, if applicable.
- ÚdajeBase: The baseline of these stairs, if any.
- ÚdajeHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
- ÚdajeLength: The total length of these stairs if no baseline is defined.
- ÚdajeWidth: The width of these stairs.
Steps
- ÚdajeNosing: The size of the nosing.
- ÚdajeNumber of Steps: The numbers of steps (risers) in these stairs.
- ÚdajeRiser Height: The height of the risers.
- ÚdajeTread Depth: The depth of the treads.
- ÚdajeTread Thickness: The thickness of the treads.
Structure
- ÚdajeLandings: The type of landings.
- ÚdajeStringer Offset: The offset between the border of the stairs and the structure.
- ÚdajeStringer Width: The width of the stringers.
- ÚdajeStructure: The type of structure of these stairs.
- ÚdajeStructure Thickness: The thickness of the structure.
- ÚdajeWinders: The type of winders.
Scripting
Stairs can be created from python scripts and macros by using the following function:
makeStairs([base], [length], [width], [height], [steps])- Creates a stairs object with the given attributes.
- Returns the new stairs object.
Example:
import Arch
makeStairs(length=5, width=1.2, height=3, steps=14)Limitations
- Not available before FreeCAD version 0.14
- Only straight stairs are available at the moment
- See the forum entry for circle stairs.
- See the forum announcement.