Arch: Armatura a L

From FreeCAD Documentation
Revision as of 16:02, 10 February 2018 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Arch Rebar LShape

Menu location
Arch → Rebar tools
Workbenches
Arch
Default shortcut
None
See also
Bent Shape Rebar
 
This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager

Description

The LShape Rebar tool allows user to create LShape reinforcing bar in the structural element.

How to use

  1. Create a structure element
  2. Select any face of the structure
  3. Then select LShape Rebar from the rebar tools
  4. A task panel will pop-out on the left side of the screen as shown below
  5. Select the desired orientation
  6. Give the inputs like front cover, left side cover, right side cover, bottom cover, top cover, rounding and diameter of the rebar
  7. Select the mode of distribution either amount or spacing
  8. If spacing is selected, a user can also opt for custom spacing
  9. Pick selected face is used to verify or change the face for rebar distribution
  10. Click OK or Apply to generate the rebars
  11. Click Cancel to exit the task panel

Properties

  • DatiOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
  • DatiFront Cover: The distance between rebar and selected face.
  • DatiRight Cover: The distance between the right end of the rebar to right face of the structure.
  • DatiLeft Cover: The distance between the left end of the rebar to the left face of the structure.
  • DatiBottom Cover: The distance between rebar from the bottom face of the structure.
  • DatiTop Cover: The distance between rebar from the top face of the structure.
  • DatiRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
  • DatiAmount: The amount of rebars.
  • DatiSpacing: The distance between the axes of each bar.

Scripting

The LShape Rebar tool can by used in macros and from the python console by using the following function:

makeLShapeRebar(FrontCover, BottomCover, LeftCover, RightCover, Diameter, TopCover, Rounding, AmountSpacingCheck, AmountSpacingValue, orientation, Structure, Facename)
  • The LShape Rebar have four different orientations:
    • Bottom Right
    • Bottom Left
    • Top Right
    • Top Left
  • Adds a LShape reinforcing bar object to the given structural object.
  • If no Structure and Facename is given, it will take user selected face as input.
  • Here CoverAlong argument is having type tuple.
  • Returns the new Rebar object.

Example: Creating LShape rebar.

import Arch, LShapeRebar
structure = Arch.makeStructure(length=1000.0, width=1000.0, height=400.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = LShapeRebar.makeLShapeRebar(20, 20, 20, 20, 8, 20, 2, True, 10, "Bottom Left", structure, "Face1")

Changing properties of LShape rebar.

import LShapeRebar
LShapeRebar.editLShapeRebar(50, 50, 20, 20, 8, 20, 2, True, 5, "Top Left")