Arch Armierung LForm

From FreeCAD Documentation
Revision as of 23:47, 9 February 2019 by Le Loup (talk | contribs) (Created page with "# Wähle eine beliebige Fläche eines vorher erstellten {{Button|16px Struktur}}-Objekts. # Wähle dann {{Button|Image:Arc...")

Arch Bewehrungsstab L-förmig

Menüeintrag
Arch → Rebar tools
Arbeitsbereich
Arch, BIM
Standardtastenkürzel
Keiner
Eingeführt in Version
0.17
Siehe auch
abgewinkelter Bewehrungsstab, Bewehrungsstab

Beschreibung

Das L-förmiger Bewehrungsstab-Werkzeug erlaubt es dem Anwender, einen Satz von L-förmigen Bewehrungsstäben in einem Struktur-Objekt zu erstellen.

Dieser Befehl ist Teil des Reinforcement-Addons, das mit dem Addon-Manager über das Menü Werkzeuge → Addon-Manager → Reinforcement installiert werden kann.

Vier Sätze von L-förmigen Bewehrungsstäben in einer Struktur

Anwendung

  1. Wähle eine beliebige Fläche eines vorher erstellten Struktur-Objekts.
  2. Wähle dann L-förmiger Bewehrungsstab aus den Bewehrungsstab-Werkzeugen.
  3. Ein Aufgaben-Paneel wird auf der linken Seite des Bildschirm angezeigt wie im folgenden Bild dargestellt.
  4. Wähle die gewünschte Ausrichtung.
  5. Gib die Werte für vordere, linke, rechte, untere und obere Fläche an, außerdem Biegeradius und Durchmesser des Bewehrungsstabes.
  6. Wähle den Verteilungsmodus, entweder amount (Menge) oder spacing (Abstand).
  7. Falls 'spacing' gewählt wurde, kann auch benutzerdefinierter Abstand gewählt werden.
  8. Wähle 'Pick selected face' zur Überprüfung oder ändere die Fläche zur Verteilung der Bewehrungsstäbe.
  9. Klicke OK oder Anwenden zur Erzeugung der Bewehrungsstäbe.
  10. Klicke Abbrechen zum Verlassen des Aufgaben-Paneels.

Taskview panel for the Arch Rebar LShape tool

Properties

  • DatenOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
  • DatenFront Cover: The distance between rebar and selected face.
  • DatenRight Cover: The distance between the right end of the rebar to right face of the structure.
  • DatenLeft Cover: The distance between the left end of the rebar to the left face of the structure.
  • DatenBottom Cover: The distance between rebar from the bottom face of the structure.
  • DatenTop Cover: The distance between rebar from the top face of the structure.
  • DatenRounding: A rounding value to be applied to the corners of the bars, expressed in times the diameter.
  • DatenAmount: The amount of rebars.
  • DatenSpacing: The distance between the axes of each bar.

Scripting

See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.

The LShape Rebar tool can be used in macros and from the Python console by using the following function:

Rebar = makeLShapeRebar(f_cover, b_cover, l_cover, r_cover,
                        diameter, t_cover, rounding, amount_spacing_check, amount_spacing_value, orientation="Bottom Left",
                        structure=None, facename=None):
  • Creates a Rebar object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.
    • If no structure nor facename are given, it will take the user selected face as input.
  • f_cover, b_cover, l_cover, r_cover, and t_cover are inner offset distances for the rebar elements with respect to the faces of the structure. They are respectively the front, bottom, left, right, and top offsets.
  • diameter is the diameter of the reinforcement bars inside the structure.
  • rounding is the parameter that determines the bending radius of the reinforcement bars.
  • amount_spacing_check if it is True it will create as many reinforcement bars as given by amount_spacing_value; if it is False it will create reinforcement bars separated by the numerical value of amount_spacing_value.
  • amount_spacing_value specifies the number of reinforcement bars, or the value of the separation between them, depending on amount_spacing_check.
  • orientation specifies the orientation of the rebar; it can be "Bottom Right", "Bottom Left", "Top Right", or "Top Left".

Example

import FreeCAD, Arch, LShapeRebar

Structure = Arch.makeStructure(length=1000, width=1000, height=400)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = LShapeRebar.makeLShapeRebar(50, 20, 20, 20,
                                    8, 50, 4, True, 6, "Bottom Left", Structure, "Face4")
Rebar.ViewObject.ShapeColor = (0.9, 0.0, 0.0)

Rebar2 = LShapeRebar.makeLShapeRebar(50, 50, 20, 20,
                                     8, 50, 4, True, 6, "Bottom Left", Structure, "Face6")
Rebar2.ViewObject.ShapeColor = (0.0, 0.0, 0.9)

Edition of the rebar

You can change the properties of the rebar with the following function

editLShapeRebar(Rebar, f_cover, b_cover, l_cover, r_cover,
                diameter, t_cover, rounding, amount_spacing_check, amount_spacing_value, orientation,
                structure=None, facename=None)
  • Rebar is a previously created LShapeRebar object.
  • The other parameters are the same as required by the makeLShapeRebar() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.
import LShapeRebar

LShapeRebar.editLShapeRebar(Rebar, 50, 50, 20, 20,
                            12, 50, 6, True, 5, "Top Right")

LShapeRebar.editLShapeRebar(Rebar2, 50, 50, 20, 20,
                            12, 70, 6, True, 5, "Top Right")