Arch: Armatura sagomata

From FreeCAD Documentation
Revision as of 09:40, 11 February 2018 by Renatorivo (talk | contribs) (Created page with "== Script ==")

Armatura sagomata

Posizione nel menu
Arch → Strumenti armatura
Ambienti
Arch
Avvio veloce
None
Vedere anche
Armatura, Armatura a U, Armatura dritta, Armatura a L, Staffe armatura, Armatura elicoidale
 
Questo comando fa parte del Addon Reinforcement, che è possibile installare tramite il menu Strumenti → Addons Manager

Descrizione

Lo strumento Armatura sagomata crea una armatura sagomata in un elemento strutturale selezionato.

Utilizzo

  1. Creare un elemento Struttura
  2. Selezionare una qualsiasi faccia della struttura
  3. Selezionare Armatura sagomata dagli strumenti Armatura
  4. Sul lato sinistro dello schermo appare un pannello delle azioni come il seguente
  5. Selezionare l'orientamento desiderato
  6. Fornire i dati per front cover, right side cover, left side cover, bottom cover, top cover, rounding factor and diameter of the rebar
  7. Selezionare la modalità di distribuzione per la quantità e per la spaziatura
  8. Se la spaziatura è selezionata, l'utente può anche optare per una spaziatura personalizzata
  9. Cliccare sulla faccia selezionata serve per verificare o modificare la faccia per la distribuzione dell'armatura
  10. Cliccare OK o Apply per generare l'armatura
  11. Cliccare Cancel per uscire dal pannello delle azioni

Proprietà

  • DatiOrientation: Decide l'orientamento dell'armatura (es. in basso, in alto, a destra e a sinistra).
  • DatiFront Cover: La distanza tra l'armatura e la faccia selezionata. Copriferro anteriore
  • DatiRight Cover: La distanza tra l'estremità destra della barra di destra e la faccia destra della struttura. Copriferro destro
  • DatiLeft Cover: La distanza tra l'estremità sinistra della barra di sinistra e la faccia sinistra della struttura. Copriferro sinistro
  • DatiBottom Cover: La distanza tra l'armatura e la parte inferiore della struttura. Copriferro inferiore
  • DatiTop Cover: La distanza tra l'armatura e la parte superiore della struttura. Copriferro superiore
  • DatiAnchor Length: È la lunghezza del braccio della barra piegata.
  • DatiBent Angle: L'angolo di piega
  • DatiAmount: La quantità di barre.
  • DatiSpacing: La distanza tra gli assi di ogni barra.

Script

The Bent Shape Rebar tool can by used in macros and from the python console by using the following function:

makeBentShapeRebar(FrontCover, BottomCover, LeftCover, RightCover, Diameter, TopCover, BentLength, BentAngle, Rounding, AmountSpacingCheck, AmountSpacingValue, Orientation, Structure, Facename)
  • The Bent Shape Rebar have four different orientations:
    • Bottom
    • Top
    • Left
    • Right
  • Adds a Bent Shape reinforcing bar object to the given structural object.
  • If no Structure and Facename is given, it will take user selected face as input.
  • Here CoverAlong argument is having type tuple.
  • Returns the new Rebar object.

Example: Creating Bent Shape rebar.

import Arch, BentShapeRebar
structure = Arch.makeStructure(length=1000.0, width=1000.0, height=100.0)
structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()
rebar = BentShapeRebar.makeBentShapeRebar(20, 20, 20, 20, 8, 20, 100, 135, 2, True, 10, "Bottom", structure, "Face1")

Changing properties of Bent Shape rebar.

import BentShapeRebar
BentShapeRebar.editBentShapeRebar(rebar, 50, 50, 50, 50, 12, 20, 100, 135, 2, True, 10, "Top")