Arch Workbench: Difference between revisions

From FreeCAD Documentation
(space)
(Marked this version for translation)
Line 15: Line 15:
These are tools for creating architectural objects.
These are tools for creating architectural objects.


<!--T:14-->
* [[Image:Arch_Wall.png|32px]] [[Arch_Wall|Wall]]: Creates a wall from scratch or using a selected object as a base
* [[Image:Arch_Wall.png|32px]] [[Arch_Wall|Wall]]: Creates a wall from scratch or using a selected object as a base
* [[Image:Arch_Structure.png|32px]] [[Arch_Structure|Structural element]]: Creates a structural element from scratch or using a selected object as a base
* [[Image:Arch_Structure.png|32px]] [[Arch_Structure|Structural element]]: Creates a structural element from scratch or using a selected object as a base


<!--T:15-->
* Rebar tools
* Rebar tools
** [[Image:Arch_Rebar_Straight.png|32px]] [[Arch_Rebar_Straight|Straight Rebar]]: Creates a Straight reinforcement bar in a selected structural element
** [[Image:Arch_Rebar_Straight.png|32px]] [[Arch_Rebar_Straight|Straight Rebar]]: Creates a Straight reinforcement bar in a selected structural element
Line 32: Line 34:
* [[Image:Arch_SectionPlane.png|32px]] [[Arch_SectionPlane|Section Plane]]: Adds a section plane object to the document
* [[Image:Arch_SectionPlane.png|32px]] [[Arch_SectionPlane|Section Plane]]: Adds a section plane object to the document


<!--T:16-->
* Axis tools
* Axis tools
** [[Image:Arch_Axis.png|32px]] [[Arch_Axis|Axis]]: Adds a 1-direction array of axes to the document
** [[Image:Arch_Axis.png|32px]] [[Arch_Axis|Axis]]: Adds a 1-direction array of axes to the document
Line 40: Line 43:
* [[Image:Arch_Stairs.png|32px]] [[Arch_Stairs|Stairs]]: Creates a stairs object in the document
* [[Image:Arch_Stairs.png|32px]] [[Arch_Stairs|Stairs]]: Creates a stairs object in the document


<!--T:17-->
* Panel tools
* Panel tools
** [[Image:Arch_Panel.png|32px]] [[Arch_Panel|Panel]]: Creates a panel object from a selected 2D object
** [[Image:Arch_Panel.png|32px]] [[Arch_Panel|Panel]]: Creates a panel object from a selected 2D object
Line 48: Line 52:
* [[Image:Arch_Equipment.png|32px]] [[Arch_Equipment|Equipment]]: Creates an equipment or furniture object
* [[Image:Arch_Equipment.png|32px]] [[Arch_Equipment|Equipment]]: Creates an equipment or furniture object


<!--T:18-->
* Pipe tools {{Version|0.17}}
* Pipe tools {{Version|0.17}}
** [[Image:Arch_Pipe.png|32px]] [[Arch_Pipe|Pipe]]: Creates a pipe {{Version|0.17}}
** [[Image:Arch_Pipe.png|32px]] [[Arch_Pipe|Pipe]]: Creates a pipe {{Version|0.17}}
** [[Image:Arch_PipeConnector.png|32px]] [[Arch_PipeConnector|Pipe Connector]]: Creates a corner or tee connection between 2 or 3 selected pipes {{Version|0.17}}
** [[Image:Arch_PipeConnector.png|32px]] [[Arch_PipeConnector|Pipe Connector]]: Creates a corner or tee connection between 2 or 3 selected pipes {{Version|0.17}}


<!--T:19-->
* Material tools
* Material tools
** [[Image:Arch_SetMaterial.png|32px]] [[Arch_SetMaterial|Material]]: Creates a material and attributes it to selected objects, if any
** [[Image:Arch_SetMaterial.png|32px]] [[Arch_SetMaterial|Material]]: Creates a material and attributes it to selected objects, if any
Line 57: Line 63:
* [[Image:Arch_Schedule.png|32px]] [[Arch_Schedule|Schedule]]: Creates different types of schedules
* [[Image:Arch_Schedule.png|32px]] [[Arch_Schedule|Schedule]]: Creates different types of schedules


===Modification tools===
===Modification tools=== <!--T:20-->


<!--T:21-->
These are tools for modifying architectural objects.
These are tools for modifying architectural objects.


<!--T:22-->
* [[Image:Arch_CutPlane.png|32px]] [[Arch_CutPlane|Cut with plane]]: Cut an object according to a plan.
* [[Image:Arch_CutPlane.png|32px]] [[Arch_CutPlane|Cut with plane]]: Cut an object according to a plan.
* [[Image:Arch_Add.png|32px]] [[Arch_Add|Add component]]: Adds objects to a component
* [[Image:Arch_Add.png|32px]] [[Arch_Add|Add component]]: Adds objects to a component
Line 66: Line 74:
* [[Image:Arch_Survey.png|32px]] [[Arch_Survey|Survey]]: Enters or leaves surveying mode
* [[Image:Arch_Survey.png|32px]] [[Arch_Survey|Survey]]: Enters or leaves surveying mode


===Utilities===
===Utilities=== <!--T:23-->


<!--T:24-->
These are additional tools to help you in specific tasks.
These are additional tools to help you in specific tasks.


<!--T:25-->
* [[Image:Arch_Component.png|32px]] [[Arch_Component|Component]]: Creates a non-parametric Arch component
* [[Image:Arch_Component.png|32px]] [[Arch_Component|Component]]: Creates a non-parametric Arch component
* [[Image:Arch_cloneComponent.png|32px]] [[Arch_CloneComponent|Clone component]]:
* [[Image:Arch_cloneComponent.png|32px]] [[Arch_CloneComponent|Clone component]]:
Line 85: Line 95:
* [[Image:Arch_ToggleSubs.png|32px]] [[Arch_ToggleSubs|Toggle Subcomponents]]: Shows or hides the subcomponents of an Arch object.
* [[Image:Arch_ToggleSubs.png|32px]] [[Arch_ToggleSubs|Toggle Subcomponents]]: Shows or hides the subcomponents of an Arch object.


===Preferences===
===Preferences=== <!--T:26-->


<!--T:27-->
* [[Image:Std_DlgParameter.png|32px]] [[Arch_Preferences|Preferences...]]: Preferences disposable in Arch Module.
* [[Image:Std_DlgParameter.png|32px]] [[Arch_Preferences|Preferences...]]: Preferences disposable in Arch Module.


Revision as of 16:30, 21 May 2018

The Arch workbench provides modern BIM workflow to FreeCAD, with support for features like IFC support, fully parametric architectural entities such as walls, structural elements or windows, and rich 2D document production. The Arch workbench also feature all the tools from the Draft Workbench.

Note: The BIM functionality of FreeCAD is now progressively split into this Arch Workbench, which holds all the base BIM tools, and the BIM Workbench addon, that you can install via menu Tools->Addon Manager, that adds a new interface layer on top of the Arch tools, with the aim to make BIM workflow in FreeCAD more intuitive and user-friendly.

Tools

These are tools for creating architectural objects.

  • Wall: Creates a wall from scratch or using a selected object as a base
  • Structural element: Creates a structural element from scratch or using a selected object as a base
  • Rebar tools
    • Straight Rebar: Creates a Straight reinforcement bar in a selected structural element
    • UShape Rebar: Creates a UShape reinforcement bar in a selected structural element
    • LShape Rebar: Creates a LShape reinforcement bar in a selected structural element
    • Bent Shape Rebar: Creates a Bent Shape reinforcement bar in a selected structural element
    • Stirrup Rebar: Creates a Stirrup reinforcement bar in a selected structural element
    • Helical Rebar: Creates a Helical reinforcement bar in a selected structural element
    • Rebar: Creates a custom reinforcement bar in a selected structural element using a sketch
  • Floor: Creates a floor including selected objects
  • Building: Creates a building including selected objects
  • Site: Creates a site including selected objects
  • Window: Creates a window using a selected object as a base
  • Section Plane: Adds a section plane object to the document
  • Axis tools
    • Axis: Adds a 1-direction array of axes to the document
    • Axes system: Adds an axes system composed of several axes to the document
    • Grid: Adds a grid-like object to the document
  • Roof: Creates a sloped roof from a selected face
  • Space: Creates a space object in the document
  • Stairs: Creates a stairs object in the document

Modification tools

These are tools for modifying architectural objects.

Utilities

These are additional tools to help you in specific tasks.

Preferences

File formats

  • IFC : Industry foundation Classes
  • DAE : Collada mesh format
  • OBJ : Obj mesh format (export only)
  • JSON : JavaScript Object Notation format (export only)
  • 3DS : 3DS format (import only)

API

The Arch module can be used in python scripts and macros using the Arch Python API functions.

Tutorials

Draft Module
FEM Module


Other languages:
Retrieved from "http://wiki.freecad.org/index.php?title=Arch_Workbench&oldid=284852"