Arch Schnittebene

From FreeCAD Documentation
Revision as of 19:15, 27 November 2018 by Renatorivo (talk | contribs) (Created page with "Category:Arch/de")

Arch CutPlane

Menüeintrag
Arch → Cut Plane
Arbeitsbereich
Arch
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Arch Remove

Beschreibung

The Cut Plane tool allows you to cut an Arch object according to a plan:

  • You can cut an Arch object with the selected face, normal or opposite of the face plan.
  • This add a substraction component CutVolume to the Arch object

In the above image, two Arch Structure are cut with respective plane.

How to use

  1. Select the object to be cut, then the face (the face must be the last one you selected, and must be selected in the 3D-View)
  2. Press the Cut Plane button
  3. Choose if the object is cut behind the normale face or front of the normal face
  4. Click the Ok button

Scripting

The CutPlane tool can by used in macros and from the python console by using the following function:

cutComponentwithPlane (archObject,face,faceSide)
  • archObject is the object to cut
  • face is the face of an object that come the plan from
  • faceSide is the side of the face to cut. 0 = Behind, 1 = Front