Vector API/de
Vektoren werden überall in FreeCAD benutzt.
Beispiel:
v=FreeCAD.Vector()
v=FreeCAD.Vector(1,0,0)
v=FreeCAD.Base.Vector()
v2 = FreeCAD.Vector(3,2,-5)
v3 = v.add(v2)
print v3.Length
Description: the distance between the vector and a line through Vector1 in direction Vector2.
Returns: float
Description: a vector to the closest point on a line segment from Vector1 to Vector2.
Returns: Vector
Description: the distance between the vector and a plane defined by a point and a normal.
Returns: float
Description: Checks if the distance between the points represented by this Vector and Vector2 is less than or equal to the given tolerance.
Returns: True/False
Description: Checks if this Vector is normal to Vector2 within the tolerance.
Returns: True/False
Description: Checks if this vector is on the line segment generated by Vector1 and Vector2.
Returns: Vector
Description: Checks if this Vector is parallel to Vector2 within the tolerance.
Returns: True/False
Description: multiplies (uniform scale) a vector by the given factor.
Returns: nothing
Description: projects the vector on a line through Vector1 in direction Vector2.
Returns: nothing
Description: projects the vector on a plane defined by a point (Vector1) and a normal (Vector2).
Returns: nothing
Description: Same as multiply but lets specify different values for x, y and z directions. (non-uniform scale)
Returns: nothing
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web