Translations:Arch SectionPlane/6/en

From FreeCAD Documentation
Jump to: navigation, search
  1. Optionally, set the Draft Working Plane to reflect the plane where you want to place the Section Plane.
  2. Select objects you want to be included in your section view.
  3. Press the Arch SectionPlane.svg SectionPlane button or press S then P keys.
  4. Move/rotate the Section Plane into correct position if needed.
  5. Select the Section Plane if not selected already.
  6. Use either Drawing DraftView, Draft Shape2DView or TechDraw ArchView to create a view.