Std Workbench/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Std Workbench and the translation is 0% complete.

Outdated translations are marked like this.
Other languages:
Deutsch • ‎English • ‎français • ‎italiano • ‎română • ‎русский

This documentation is not finished. Please help and contribute documentation.

Gui Command explains how tools should be documented. See Draft ShapeString for an example of a well documented tool. Browse Category:UnfinishedDocu to see incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Std Workbench.png Std Workbench

Расположение в меню
Вид → Верстак
Быстрые клавиши
Представлено в версии
См. также


This command is used to activate the graphical user interface (GUI) and the tools of a specific workbench.

It is possible to execute it in three different ways:

  • the View menu,
  • the drop-down menu, or,
  • a Python command.

There are also two special options available: None (no workbench) and Complete[deprecated].

How to use

Often the project starts in a workbench, for example with Sketch, then continues in a different workbench, for example with Part, to create objects. You can switch from the current workbench to a new one with one of the following ways:

From the View menu

  • In the top menu, open the ViewWorkbench menu and select a workbench. This menu is always available, even when you have previously selected the Complete or None workbench.

From the drop-down menu

  • In the top menu, open the drop-down menu and select a workbench. This menu is not available when you have previously selected the Complete or None workbench.

Via Python console

  • Type the command in the console, for example: Gui.activateWorkbench ("DraftWorkbench") start the workbench Draft. Always possible.


Start from the drop-down menu:


Starting from the Python console:


Through the console the command can also be copied:


Other references

For a general description of the workbenches, see the page Workbenches.