Sketcher Trimming/ru

From FreeCAD Documentation
Jump to: navigation, search
This page is a translated version of the page Sketcher Trimming and the translation is 0% complete.

Outdated translations are marked like this.
Other languages:
čeština • ‎Deutsch • ‎English • ‎español • ‎français • ‎hrvatski • ‎italiano • ‎polski • ‎português • ‎português do Brasil • ‎română • ‎русский • ‎svenska
Arrow-left.svg Previous: Sketcher CreateFillet.png Fillet
Next: Extend Sketcher Extend.svg Arrow-right.svg

Sketcher Trimming.svg Sketcher Trimming

Расположение в меню
Sketch → Геометрия эскиза → Обрезать кривую
Верстаки
Sketcher, PartDesign
Быстрые клавиши
T R
Представлено в версии
-
См. также
...


Description

This tool trims an edge to the nearest overlapping edge.

SketcherTrimExample1.png SketcherTrimExample2.png SketcherTrimExample3.png

How to use

  1. Press the Sketcher Trimming.png trim edge button. The mouse pointer turns into a white cross with a red trim symbol.
  2. Click on the edge that you want to trim.
  3. The line segment will be trimmed to the nearest overlapping line(s). If there are other sketch elements on both sides of the clicked position, the clicked piece is cut out.
  4. Pressing ESC or pressing the right mouse button will terminate the function.

Limitations

  • Arcs of hyperbola, arcs of parabola and B-splines cannot be trimmed at this time.


Arrow-left.svg Previous: Sketcher CreateFillet.png Fillet
Next: Extend Sketcher Extend.svg Arrow-right.svg